Sears 2500 manual Clean Per above Leave

Page 12

Kenmore 303.93661 FURNACE HUMIDIFIER MAINTENANCE

(APPLY THIS LABEL WHERE EASILY SEEN)

Cleaning frequency is dependent upon mineral content of water supply.

Check every other week until schedule can be determined.

1.Turn humidistat to "minimum setting."

2.Disconnect water at humidifier using quick disconnect.

3.Remove front panel, remove overflow tubing (if used), slide out reservoir and media wheel assembly while raising latch on right hand side.

4.Lift out media wheel by flexing wire support outward to release shaft.

5.Pull out pivot pin, remove float and arm.

6.Empty water from reservoir.

7.Lift out reservoir liner and replace (part number 215711-01), or clean.

8.Clean residue and lime build-up from all parts using a solution of vinegar and water, detergent and

water, or Sears All-Purpose Humidifier Cleaner (stock number 42-14713).

9.Remove media pad from wheel and clean thoroughly; replace pad if necessary - available from Sears (stock number 42-9335).

IMPORTANT: Stretch new pad lengthwise before placing in wheel.

10.If the reservoir has been overflowing the float valve button may be worn. Remove float valve button, turn over and reinsert or replace if both surfaces are worn. (Part Number 281101-01)

11.Reassemble parts in reservoir (Flex wire support outward to capture media wheel shaft under

dimples) and slide back into humidifier. Engage latch on right hand side with float valve stem.

12.Attach water supply quick connect, attach overflow tubing (if used), and allow reservoir to fill.

13.Check water level and adjust float if required.

14.Turn humidistat to "test" momentarily and check for media wheel rotation. Reset humidistat

according to outdoor temperature as instructed on label and reinstall front cover. Unit is back in operation.

Summer Shutdown

 

 

 

Unplug transformer, close saddle valve, close bypass damper.

Clean

per above

and leave

reservoir empty. (As a reminder you may want to put a tag

or sticker

on the unit

indicating it has

been shutdown and will require startup in the fall.)

 

 

 

Fall Startup

Plug in transformer, open saddle valve, open bypass damper and set humidistat to "test". Check for

proper water level and media wheel operation. Reset humidistat according to the outdoor temperature as instructed on label. Unit is back in operation.

PIN 21604001R10-00

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Installation Maintenance Repair Parts Troubleshooting KenmoreContents Thank YOU Typical Questions AskedDisassemblylaCl.3 Selecting a locationInspection AS Shipped AS ConvertedWire Support Wire Under Dimples Support By Flexing OutwardFirmly seated Fig Media Wheel Large PositionMedia DiameterInstallation Water SupplyScrews2 Collar BrassCompressionSleeve =O/ Brass InsertQuick Disconnect Assembly ISleeveSleeve InsertCold air plenum mount no20 Wall mount FigOn ColdAir Hot Air Plenum Minimum HumidistatMaintenance OperationService hints HumidifierMotor Comes On When Furnace Isnt RunningBody Summer Shut DownKenmore 2500 Central Humidifier KEY Part DescriptionClean Per above Leave Kenmore

2500 specifications

The Sears 2500 is a notable product that exemplifies the innovation and engineering prowess that Sears has cultivated over the years. Known for its versatility and reliability, the 2500 has made a significant mark in the home appliance market, catering to a diverse range of consumer needs.

One of the main features of the Sears 2500 is its robust design. Built with quality materials, it ensures durability and longevity, making it a trusted choice for households. The appliance comes equipped with a powerful motor, which delivers efficient performance, allowing users to complete their tasks swiftly and effectively.

Incorporating advanced technologies, the Sears 2500 is designed to optimize energy consumption. With its energy-efficient operation, it not only reduces electricity bills but also appeals to environmentally conscious consumers. The smart technology embedded in this model enables seamless integration with smart home systems, allowing users to control the appliance via mobile apps or voice commands. This connectivity feature adds convenience and enhances the user experience, aligning with contemporary lifestyles.

Another characteristic that sets the Sears 2500 apart is its user-friendly interface. The appliance features intuitive controls and a clear display, making it easy for users to operate. Even those who may not be tech-savvy can quickly adapt to the functionality, ensuring everyone can benefit from its features.

The Sears 2500 also boasts a range of customizable settings, allowing users to tailor its operation to meet their specific needs. This personalization not only enhances performance but also ensures that users can achieve the desired results for various tasks.

In addition to its functional capabilities, the Sears 2500 prioritizes safety. It includes built-in safety mechanisms that prevent overheating and electrical mishaps, giving users peace of mind during operation.

Overall, the Sears 2500 is a well-rounded appliance that combines quality, technology, and user-centric design. With its durable build, energy efficiency, smart features, and intuitive controls, it stands out in the competitive home appliance market. As consumers continue to seek reliable and advanced solutions, the Sears 2500 remains a top contender, representing Sears' commitment to meeting the evolving demands of modern households.
Top Page Image Contents