Service hints, Body, Summer Shut Down, Fall Start UP

Body

*Reveme buttonif it has not been used.

Replace with new buttonif bothsides are worn.

SUMMER SHUT DOWN:

Unplug transformer,close saddle valve, close bypass damper. CLEAN PER ABOVE AND LEAVE RESERVOIR EMPTY. (As a

reminder, you may want to put a tag or sticker on the unit indi-

cating it has been shut down for the summer and will require start up in the fall.)

FALL START UP:

Plug in transformer, open saddle valve, open bypass damper and sat humidistatto TEST position.Check for proper water level and media wheel operation. Set humidistataccordingto outdoortemperatureas instructedon label.

SERVICING THE FLOAT

If the humidifier has been overflowing, the float valve button may be worn. This button will wear much like a faucet washer. To service:

1.Disengage quick disconnect.

2.Remove float from humidifier (pull out pivot pin).

3.Service float as shown in illustration at left.

4.Reinstall and test float.

service hints

Frequently what seems to be a major problem can be solved very easily. Listed below are the common concerns with any humidifier.

Check the simple things first. Remove the front panel and see if there is a crusty, white lime build-up on the media pad. The lime build- up won'thurt the humidifier, but will reduce its output. Low output might just mean your humidifier needs cleaning. While you're chocking for lime build-up, look to see if the media wheel is turning. If not, check the power supply.

CONDITION

Too little

Humidity

Too much

Humidity

Humidifier

Overflows

Humidifier Making Noise

HumidifierMotor

Comes On When

Furnace Isn't

Running

WHAT TO CHECK

1.Does humidifierneed cleaning.

2.Is media wheel rotating?

3.Hun_idistatsetting.

4.Water to unit.

5.Excessive air loss in house.

6.Is water level correct?

7.Is damper open?

1.Humidistat setting.

2.Other humidification sources.

1.Is humidifier level?

2.Float valve.

3.Air flow too high.

1.Mounting or plenum.

2.Water pressure.

3.Media Wheel.

This is a normal condition

1.If heating season is over.

2.If heating season is just starting.

WHAT TO DO

1.Clean humidifier and clean or replace media pad and reservoir liner.

2.a. Clean or replace media pad.

b.Check to see if transformer is properly plugged in.

c.Inspect main fuse or circuit breaker.

d.Check to see if media motor is rotating.

e.Humidistat setting too low, turn knob clockwise to increase humidity.

3.Set for proper outdoor temperature - lowest 24-hour temperature.

4.Turn on saddle valve and check for possible obstruction in water line. Is water supply connected?

5.Close fireplace damper, seal around doors and windows.

6.Adjust float.

7.Slide damper out for winter operation.

1.Turn knob counterclockwise to decrease humidity.

2.May be a temporary condition caused by moisture from laundering, bathing, cooking, etc.

1.Level unit.

2.Service as shown in Fig. 23.

3.Adjust damper.

1.Tighten all fasteners.

2.A slight sound is normal as water enters humidifier.

3.Check clearance of media wheel in reservoir.

1.Turn knob on humidistat to minimum setting.

2.This is a normal condition since humidistat is controlling humidifier.

2500 specifications

The Sears 2500 is a notable product that exemplifies the innovation and engineering prowess that Sears has cultivated over the years. Known for its versatility and reliability, the 2500 has made a significant mark in the home appliance market, catering to a diverse range of consumer needs.

One of the main features of the Sears 2500 is its robust design. Built with quality materials, it ensures durability and longevity, making it a trusted choice for households. The appliance comes equipped with a powerful motor, which delivers efficient performance, allowing users to complete their tasks swiftly and effectively.

Incorporating advanced technologies, the Sears 2500 is designed to optimize energy consumption. With its energy-efficient operation, it not only reduces electricity bills but also appeals to environmentally conscious consumers. The smart technology embedded in this model enables seamless integration with smart home systems, allowing users to control the appliance via mobile apps or voice commands. This connectivity feature adds convenience and enhances the user experience, aligning with contemporary lifestyles.

Another characteristic that sets the Sears 2500 apart is its user-friendly interface. The appliance features intuitive controls and a clear display, making it easy for users to operate. Even those who may not be tech-savvy can quickly adapt to the functionality, ensuring everyone can benefit from its features.

The Sears 2500 also boasts a range of customizable settings, allowing users to tailor its operation to meet their specific needs. This personalization not only enhances performance but also ensures that users can achieve the desired results for various tasks.

In addition to its functional capabilities, the Sears 2500 prioritizes safety. It includes built-in safety mechanisms that prevent overheating and electrical mishaps, giving users peace of mind during operation.

Overall, the Sears 2500 is a well-rounded appliance that combines quality, technology, and user-centric design. With its durable build, energy efficiency, smart features, and intuitive controls, it stands out in the competitive home appliance market. As consumers continue to seek reliable and advanced solutions, the Sears 2500 remains a top contender, representing Sears' commitment to meeting the evolving demands of modern households.