Sears Vacuum Cleaner Ttachmentusechart, To Useattachments, To Storeattachments, Attachments

EEEEEEEI.!SINGATTACHMENTS

TO USEATTACHMENTS

DO NOTplace hands or feet underneath the unit when insertingthe hose. Thebrushassembly begins

to revolve rapidly when the vacuum is fumed on and

PersonaIInjuryHazard

• isswitchedto a carpet height setting.

Place the cleaner on a flat surface, put the handle in

the upright position and move the height adjustment to HIGH.

The attachments will fit on the hose or the wand. In

addition the dusting brush will also fit on the crevice •tool,

The hose and wand can be pulled off the short hose by grasping the cuff twi_ting and pulling up.

'C-AUTION

When usingattachments, be careful not to over-

extend the hose length when reaching. Tryingto reach beyond the hose reach could cause the cleaner to tip over.

ON SOME MODELS:

An extra wand, without tabs, is included. Thisextra wand can be added to the wand with tabs for extra

reach. Insert wand and twist a quarter of a turn to secure fit.

If the dusting brush is being used and more distance is needed the crevice tool can be added to the

wand and the dusting brush can be added to the crevice tool,

Dusting Brush Crevice Tool Wand

TO STOREATTACHMENTS

The attachments can be added tothe hose ifthe itemto be cleaned isnotfarfrom the cleaner,The hose willexpand.

NOTE: When cleaneristurned on the hose willhave a tendency tocollapsedue tosuctionofthe cleaner,

Ifmore reach isneeded the wand can be attached tothe hose and the attachmentS can be added to the wand,

Return the hose and wand to its position on the short hose and the attachments to their holders.

TTACHMENTUSECHART

ATTACHMENT			Between
		Furniture*	Cushions*	Drapes*	Stairs	Walls
CREVICE	TOOL	X	X	X	X	X
		/
							*Alwaysclean
DUSTING	BRUSH	X		X	X	X	attachments

before using on fabrics.