Sears 153.326763 40 GAL. MEDIUM Valve and Pipe Insulation, Temperature-Pressure Relief Valve

Page 10

NOTE: To protect against untimely corrosion of hot and cold water fittings, it is strongly recommended that di-electric unions or couplings be installed on this water heater when connected to copper pipe.

1.Look at the top cover of the water heater. The hot water outlet is marked hot. Put two or three turns of teflon tape around the threaded end of the threaded-to-sweat coupling and around both ends of the 3/4” threaded nipple. Using flexible connectors, connect the hot water pipe to the hot water outlet of the water heater.

2.Look at the top cover of the water heater. The cold water inlet is marked cold. Put two or three turns of teflon tape around the threaded end of the threaded-to-sweat coupling and around both ends of the 3/4” threaded nipple. Using flexible connectors, connect the cold water pipe to the cold water inlet of the water heater.

NOTE: Your water heater is insulated to minimize heat loss from the tank. Further reduction in heat loss can be accomplished by insulating the hot water lines from the water heater.

FIGURE 8.

T & P Valve and Pipe Insulation

Remove insulation for T & P valve and pipe connections from carton.

Fit pipe insulation over the incoming cold water line and the hot water line. Make sure that the insulation is against the top cover of the heater.

Fit T & P valve insulation over valve. Make sure that the insulation does not interfere with the lever of the T & P valve.

Secure all insulation using tape.

FIGURE 9.

Temperature-Pressure Relief Valve

This heater is provided with a properly certified combination temperature - pressure relief valve by the manufacturer.

The valve is certified by a nationally recognized testing laboratory that maintains periodic inspection of production of listed equipment of materials as meeting the requirements for Relief Valves for Hot Water Supply Systems, ANSI Z21.22 • CSA 4.4, and the code requirements of ASME.

If replaced, the valve must meet the requirements of local codes, but not less than a combination temperature and pressure relief valve certified as indicated in the above paragraph.

The valve must be marked with a maximum set pressure not to exceed the marked hydrostatic working pressure of the water heater (150 psi = 1,035 kPa) and a discharge capacity not less than the water heater input rate as shown on the model rating plate. (For electric heaters, watts x 3.412 equals Btu/hr input rate)

For safe operation of the water heater, the relief valve must not be removed from its designated opening nor plugged.

The temperature-pressure relief valve must be installed directly into the fitting of the water heater designed for the relief valve.

10

Image 10
Contents Power Miser Electric Water Heater Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.ASafe INSTALLATION, USE and Service General Safety Table of Contents Product Specifications IntroductionMaterials Needed Additional Tools Needed When Sweat SolderingMaterials and Basic Tools Needed Basic ToolsInstallation Instructions Removing the Old Water HeaterInsulation Blankets Facts to Consider About the LocationFacts to Consider About Convertible Lower Element Water Piping Temperature-Pressure Relief Valve Valve and Pipe InsulationFilling the Water Heater Converting the Lower Element Page Wiring Page Wiring Diagrams Temperature Settings Upper and Lower Thermostat Adjustments Service and AdjustmentTemperature Regulation ThermostatsAnode Rod Inspection Temperature-Pressure Relief Valve OperationDraining Thermostat Removal/Replacement Element Cleaning/ReplacementPage Page Drain Valve Washer Replacement ServiceStart Up Conditions TroubleshootingOperational Conditions AIR in HOT Water Faucets Water is TOO HOT Leakage Checkpoints Repair Parts List Model NumbersBuss Bar Kit 9001591 153.326862 Gallon Short 153.326863 Page Page MY-HOME

153.326663 50 GAL. MEDIUM, 153.326862 50 GAL. SHORT, 153.326362 30 GAL, 153.326563 55 GAL, 153.326762 40 GAL. MEDIUM specifications

Sears has been a prominent name in retail for over a century, renowned for providing various household products to consumers. Among their extensive lineup of items are the versatile water heaters catering to different household needs. The Sears water heater series includes models like the 153.326662 50 GAL MEDIUM, 153.326363 30 GAL, 153.326463 40 GAL, 153.326763 40 GAL MEDIUM, and 153.326562 55 GAL. Each of these models showcases unique characteristics suited for different preferences and household sizes.

The 153.326662 50 GAL MEDIUM is designed to deliver ample hot water for larger households. It features high-efficiency insulation, which minimizes heat loss and boosts the overall energy efficiency of the unit. This model is equipped with a powerful heating element that quickly recharges the water supply, ensuring that you never run out of hot water during peak usage times.

On the other hand, the 153.326363 30 GAL model is a perfect fit for smaller homes or apartments, where space is at a premium. Despite its compact size, it features advanced heating technology that efficiently warms water without significant energy expenditure. This model also includes built-in safety features, such as automatic shut-off valves and a corrosion-resistant tank, enhancing durability and performance.

The 153.326463 40 GAL and the 153.326763 40 GAL MEDIUM units offer an optimal balance for medium-sized households. These models boast similar capacities but differ slightly in their energy consumption profiles. Both models are equipped with smart technology that allows for easy temperature adjustments and energy efficiency monitoring. Additionally, they include user-friendly digital displays that provide instant feedback on water temperature and heating status.

Finally, the 153.326562 55 GAL model stands as one of the larger offerings from Sears. Its substantial capacity ensures that even the most demanding households can rely on a consistent supply of hot water. Like the others, this model incorporates the latest in heating technology, making it efficient and cost-effective over time.

In conclusion, Sears' lineup of water heaters—whether it's a compact 30-gallon unit or a robust 55-gallon solution—caters to a diverse range of consumer needs. Each model combines efficiency, safety, and practicality, making them reliable choices for homeowners seeking effective hot water solutions.