Cleaning Your Humidifier

WARNING: To reduce the risk of injury, fire or damage to humidifier, use only cleaners specifically rec-

ommended for humidifiers. Never use flammable, combustible or poi-

sonous materials to clean your

humidifier. To reduce the risk of scalds and damage to humidifier, never put hot water in humidifier.

CAUTION: Local water purity varies from area to area and under certain conditions water impurities and air- borne bacteria may promote the

growth of microorganisms in the reservoir of the humidifier.

To retard bacteria growth that may cause odors and be harmful to your health, use only Sears replacement filters. We also recommend using EPA approved bacteriostat, 42-14900

and humidifier cleaner 42-14713, available at your local Sears store.

NOTE: If it is necessary to use approved bacteriostat, follow directions correctly. The bottles of the whole house humidifier will hold 2-3/8 gallons of water each. Step 1

To make cleaning easier, the humidifier cabinet should be empty and completely dried out. To accomplish this, use the fol- lowing method:

a.On the back side of the humidifier cab- inet, find the float retainer. In normal operating mode, the retainer will be positioned in the bottom of the slot in the cabinet. Push the retainer up to the top slot position in the cabinet until it locks in place. (See "Manual Dryout" section on page 7.)

b.Allow the humidifier to run until there is no water left in the cabinet.

c.Unplug humidifier.

WARNING: If humidifier is not un-

plugged, fan could start after housing is removed.

Step 2

To Remove Parts

a.Open the pivoting lid and remove water bottles and set aside. Grasp the fan

assembly front center and rear center. Lift off and set aside on a clean flat sur-

face. The filter housings are now accessible.

b.Before removing the internal pads of the humidifier cabinet, we recommend moving the humidifier to an area where floor coverings are not susceptible to water damage, i.e., kitchen or bath

area. Lift the filter housing assemblies out of the cabinet and set to the side.

c.Remove the water level float from the humidifier cabinet by pinching the float retainer to release it from the cabinet. The cabinet should be empty before

cleaning. The cabinet consists of the lower areas of the humidifier where the

filters are during normal operation time.

d.Empty cabinet of any remaining water.

e.Proceed to "Bi-Weekly Maintenance" or "End of Season Maintenance."

f.Remove old filters and dispose of prop- erly as described on page 9 and 10.

Step 3

Install new filters (purchase the correct evaporative wicking filter pads 42-14911 for your humidifier) into the location where the old filters were positioned. Install the filter housings with the new filters into the correct location. Reinstall the water level float. NOTE: Float retainer should be posi- tioned in normal operating mode. Assure that it is positioned in the bottom of the slot in the back of the cabinet. (See page 7 for diagram of slot.) Position the fan assembly

on top of the cabinet and return the humid- ifier to the desired location for use.

Refill humidifier bottles with fresh cool water and return them to the cabinet. Plug the unit into a 120 volt A.C. power outlet and set the

controls per the "Operating Humidifier Controls" section of this manual.

758.144151 specifications

The Sears 758.144151, a home appliance icon, reflects a blend of efficiency and reliability. Primarily known as a versatile lawn and garden tool, this equipment was designed to meet the challenges of modern landscaping while providing users with exceptional ease of operation.

At the heart of the Sears 758.144151 is its robust engine, which offers powerful performance suitable for various tasks, from trimming to edging. Its state-of-the-art 2-stroke engine technology ensures smooth operation, enabling the user to tackle tough tasks without losing performance. The engine's design also promotes fuel efficiency, which helps maintain longer run times while reducing the frequency of refueling during extensive projects.

One of the standout features of this model is its adjustable cutting head. This allows users to efficiently handle a variety of terrains and grass types without the need for extensive manual adjustments. The cutting width can easily be altered, enabling quick changes between narrow and wide areas, making it adaptable for both residential gardens and larger open spaces.

Another innovative aspect of the Sears 758.144151 is its ergonomic handle design. The handles are crafted to provide a comfortable grip, which reduces user fatigue during extended use. This attention to user comfort is complemented by its lightweight structure, making it easy to maneuver around obstacles and tight spaces.

For added convenience, the Sears 758.144151 comes equipped with a quick-start mechanism, which simplifies the ignition process. Users can enjoy seamless starts even in colder weather, a common challenge for outdoor power equipment.

Safety features have not been overlooked. The model includes a safety guard that helps protect the operator from debris and ensures that safety standards are maintained during operation. Moreover, its durable construction materials are designed to withstand the rigors of outdoor use, ensuring longevity and reliability over time.

In conclusion, the Sears 758.144151 stands out due to its blend of cutting-edge technologies, user-friendly features, and durable design. It represents a perfect solution for homeowners and landscapers looking for a reliable and efficient tool to maintain their outdoor spaces.