Installation Fundamentals | Niles Audio DS8..5, DS8.3 manual

Installation Fundamentals

Installation

Fundamentals

Running the Loudspeaker Wire in New Construction

If you have doubts about whether you are capable of installing a Niles ceiling mount loudspeakers, consult a Niles dealer or professional installer. They have special tools, techniques, and experience to make the impossible possible. The installer can provide you with an estimate before any work is done.

Scheduling and Preparation

Plan to schedule the loudspeaker wiring after the electrical wiring is finished. That way you can avoid wire routes which could potentially induce hum over the speaker wire. The basic rules are:

•Never run loudspeaker wire through the same hole as an electrical cable.

•Never run loudspeaker wire into the same J-box as electrical cable.

•Avoid running the loudspeaker wire beside the electrical cable. Keep your speaker cable at a distance of at least 18"-22" from any electrical power cable.

Figure 7

Side-by-side wiring is unavoidable in particular spots in every house, just move the speaker wire route away as soon as possible. If construction forces a side by side run for more than ten feet, install metal conduit or shielded speaker wire. Low-voltage wires such as doorbells, inter- coms, telephone, security, or television cannot cause interference or hum on your speaker wires, so you can safely run all of them at the same time, through the same holes, side-by-side.

Before you drill any holes, mount the loudspeaker brackets in the desired speak- er locations and mount p-rings or open backed J-boxes where the in-wall volume controls and stereo equipment will be.

Safety First!

Wear gloves, safety goggles and head protection when drilling. Avoid nails, they ruin bits and they can create injury. Pay particular care when using “hole-hogs” and other powerful electric drills; the torque of the drill when suddenly stopped by a nail can break the wrist of a strong man.

Drilling

Use a bit that is large enough for the wires you plan to run. An auger bit is the preferred bit for rough-in wiring. It will actually pull itself through the wood, so that the drill motor, not you, does most of the work. You may be drilling a lot of holes, so this is an important consideration.

Always drill the holes in the center of the stud. If you have to notch the stud or drill the hole closer than one inch from the edge of the stud, protect the wire with a nail plate (See Figure 7).

When drilling holes in ceiling joists drill in the center of the joists and try to locate the hole near the end of the joist. DO NOT drill through a “gluelam” or any load bearing beam without the direction of your contractor.

DS8.3, DS8..5 specifications

Niles Audio has been a prominent name in high-quality audio solutions, and their series of speakers, particularly the DS8.5 and DS8.3, continue to set benchmarks in the industry. These in-ceiling speakers are designed for those seeking exceptional sound quality while blending seamlessly into their living environments.

The Niles Audio DS8.5 is particularly known for its impressive 8-inch polypropylene cone woofer, which delivers deep, rich bass that enhances the listening experience. Its dual voice coil design allows for flexibility in wiring configurations, making it easier to achieve optimal sound distribution throughout a space. The DS8.5 also features a 1-inch silk dome tweeter, which adds clarity and detail to higher frequencies, ensuring that every nuance of music and dialogue is crisp and clear.

On the other hand, the DS8.3 offers similar high-quality audio but with slightly smaller 6.5-inch woofers. This model caters to those who may have more compact spaces but still desire remarkable sound performance. The DS8.3 maintains the same 1-inch silk dome tweeter, providing an impressive audio experience with a smooth frequency response and reduced distortion.

Both models incorporate advanced technologies such as a patented dual-tweeter design in the DS8.5, which allows listeners to experience a broader soundstage. The speakers come equipped with Niles' EZ-Install mounting system, making installation straightforward, whether you're a DIY enthusiast or hiring a professional. The speakers’ low-profile design and paintable grilles enable them to blend into any decor seamlessly.

Furthermore, both the DS8.5 and DS8.3 are crafted from durable materials designed to withstand various environmental conditions, making them suitable for indoor and outdoor use. Their robust construction enhances their longevity and ability to deliver consistent performance over time.

In summary, Niles Audio's DS8.5 and DS8.3 speakers are perfect choices for audiophiles looking for high-quality audio solutions that do not compromise on aesthetic appeal. With their advanced technologies, versatility, and impressive sound performance, these speakers are designed to elevate any listening experience. Whether for a home theater setup, whole-house audio system, or simply enjoying music in a favorite room, Niles Audio's offerings promise satisfaction in sound quality and design.