Niles Audio DS8.3, DS8..5 manual Installation Considerations, Recommended Amplifier Power

Page 5

Installation Considerations

Recommended Amplifier Power

For satisfactory performance, we recom- mend an amplifier with a power rating of 10 to 150 watts for the DS8.3; 10 to 175 watts for the DS8.5. Curiously, most speakers are not damaged by large amplifiers but by small amplifiers. If your

system is playing loudly, a small amplifier will run out of power very quickly. When an amplifier runs out of power it creates damaging “clipping” distortion. A large amplifier will play at the same volume without distorting. See the section on operating the loudspeakers for more information about clipping distortion.

Figure 1

The illustration shows how a

New Construction Bracket serves as a

typical DS loudspeaker mounts

“hole saver” when drywall has not

into a ceiling.

been applied. It is not necessary when

 

retrofitting to existing ceilings.

 

Knockout wire tie allows the wire to be

 

secured to the bracket throughout the

 

new construction process. It knocks

 

out cleanly when the loudspeaker is

 

installed.

 

New construction wings

 

instantly snap into the

 

bracket without screws.

Dogs swivel 90°, then clamp the loudspeaker frame to the drywall.

Frames are molded with a

 

slight texture to assure

 

good paint adhesion.

Wings are scored for

 

 

easy size trimming.

Mounting screws tighten the

Brackets and wings

“dogs”, clamping the loud-

attach to the ceiling joists

speaker to the drywall.

with nails or screws.

 

Rust-proof aluminum grilles make the DS series perfect for moist environments.

Installation Considerations

Figure 2 Connect the wires and place the loudspeaker in the frame, twist and lock.

4

Image 5
Contents DS8.3 Table of Contents Introduction Hole Saving Bracket Easy InstallationTwist & LockTM Baffle Recommended Amplifier Power Installation ConsiderationsInsulation Behind The Speaker Speaker WireIncorporating Remote Control Boundary Effect Placement for Home Theater Rear Applications Placement for Varying Listening PositionsIntroduction Placement for Critical ListeningRunning the Loudspeaker Wire in New Construction Installation FundamentalsPulling the Cable Concealing Loudspeaker Wire in Existing WallsLoudspeaker Location Volume Control Stereo Installation Fundamentals Mounting New Construction Bracket Insulating the Ceiling CavityInstallation in Existing Construction See Figure Final Installation in New or Existing ConstructionDirecting the tweeter Listening at Higher Volumes Loudspeaker PhaseCleaning OperationDS8.3 SpecificationsNiles Audio Corporation Limited WarrantyDetach Here Warranty Registration Card Niles Audio Corporation

DS8.3, DS8..5 specifications

Niles Audio has been a prominent name in high-quality audio solutions, and their series of speakers, particularly the DS8.5 and DS8.3, continue to set benchmarks in the industry. These in-ceiling speakers are designed for those seeking exceptional sound quality while blending seamlessly into their living environments.

The Niles Audio DS8.5 is particularly known for its impressive 8-inch polypropylene cone woofer, which delivers deep, rich bass that enhances the listening experience. Its dual voice coil design allows for flexibility in wiring configurations, making it easier to achieve optimal sound distribution throughout a space. The DS8.5 also features a 1-inch silk dome tweeter, which adds clarity and detail to higher frequencies, ensuring that every nuance of music and dialogue is crisp and clear.

On the other hand, the DS8.3 offers similar high-quality audio but with slightly smaller 6.5-inch woofers. This model caters to those who may have more compact spaces but still desire remarkable sound performance. The DS8.3 maintains the same 1-inch silk dome tweeter, providing an impressive audio experience with a smooth frequency response and reduced distortion.

Both models incorporate advanced technologies such as a patented dual-tweeter design in the DS8.5, which allows listeners to experience a broader soundstage. The speakers come equipped with Niles' EZ-Install mounting system, making installation straightforward, whether you're a DIY enthusiast or hiring a professional. The speakers’ low-profile design and paintable grilles enable them to blend into any decor seamlessly.

Furthermore, both the DS8.5 and DS8.3 are crafted from durable materials designed to withstand various environmental conditions, making them suitable for indoor and outdoor use. Their robust construction enhances their longevity and ability to deliver consistent performance over time.

In summary, Niles Audio's DS8.5 and DS8.3 speakers are perfect choices for audiophiles looking for high-quality audio solutions that do not compromise on aesthetic appeal. With their advanced technologies, versatility, and impressive sound performance, these speakers are designed to elevate any listening experience. Whether for a home theater setup, whole-house audio system, or simply enjoying music in a favorite room, Niles Audio's offerings promise satisfaction in sound quality and design.