Honeywell THR872CUK To add or remove program time periods, Temporary schedule overrides

Operation and Programming

To add or remove program time periods

homexperttm by Honeywell THR872CUK Wireless Programmable Thermostat

Temporary schedule overrides

MON

6:30 AM			21.0°
SET TIME 1
1	2	3	4	5	6

12:00 PM 21.0°

SET TIME 3

1 2 3 4 5 6

Press and hold

You can eliminate any unwanted time periods (2 through 6) if you require fewer than six per day.

1Press the < or > buttons repeatedly to select a time period (or press the DAY button to select a different day).

2Press and hold the i button for at least two seconds to remove the selected time period. The temperature will remain at the level set for the previous time period until the following period begins.

To restore a disabled time period, follow the procedure above to select the disabled period, then press and hold the i button for at least two seconds to restore it.

Current temperature

THU 30/12/10

12:34 PM 20.5°

ROOM TEMP

AUTO MAN OFF

Desired temperature

THU 30/12/10

12:34 PM 20.5°

TARGET TEMP

When idle, the thermostat displays the current room temperature. You can press the i button at any time to see the “target” temperature the thermostat is trying to maintain.

Press the p or q buttons to change the temperature temporarily.

In Auto mode, the thermostat will maintain the temperature you set until the next program time period begins. It will then revert to the level programmed for that time period. To maintain a constant temperature for longer periods of time, switch to Manual mode (see page 11).

--:-- PM--.-°

DISABLED

AUTO MAN OFF

Set to override present time period

NOTE: See also temporary program overrides for holidays, parties or days when you stay home from work (see pages 16-18).

1 2 3 4 5 6

THU 30/12/10

12:34 PM 23.0°

TARGET TEMP

AUTO MAN OFF

14 15