Enter the PS programming mode

I N T E L L I G E N T P O W E R C O N T R O L L E R

by current. After the sequencing stops, the ON LED should be blinking. This means that the IPC-6 is ready to measure the device’s “on” state.

3.Turn on the device. The front panel LED's will sequence to the left and right while the AccusenseTM circuitry measures your device. After the sequencing of the LED's stops the OFF LED will blink.

4.Turn off the device. The front panel LED's will sequence to the left and right while the AccusenseTM circuitry checks your device. After the sequencing of the LED's stops and the IPC-6 has confirmed the programming, all the front panel LED’s will light while the IPC-6 stores the program into memory. You are now back in normal operating mode.

To program the device plugged into the ”B” sensing outlet, repeat steps 1 through 4 using the “B” button and outlet. When you begin programming, the IPC-6 will display “Pb” instead of “PA”.

Programming Switched 120 volt and

Controlled (low voltage) Outlets

You will need to program 3 different parameters for each of the switched outlets (1-6) and control outputs (C1, C2).

1.Which trigger (A, B, or both) will activate the outlet? Pressing both trigger buttons means that the outlet will be active if either or both triggers are active.

2.The turn on time delay (indicated by the ON LED being lit).

Program the delays for each outlet to build your "turn on" sequence. Delays are calculated in 1 second increments after your triggering device is turned "on" or "off". Therefore, if you would like outlet 1 to activate 2 seconds after your trig- ger device is turned on, program outlet 1's time delay to 02. If you would like outlet 2 to activate 2 seconds after outlet 1, program outlet 2's time delay to 04, etc.

3.The turn off time delay (indicated by the OFF LED being lit). Program the delays for each outlet to build your "turn off" sequence.

Turn off the devices plugged into the 2 sensing outlets before programming any of the switched or controlled outlets or the IPC-6 will not enter PS programming mode.

Press and hold down the PROGRAM button on the front panel of the IPC-6. While you are holding it down, press the SELECT button. Release both buttons. When you begin program- ming the IPC-6 will display "PS" only momentarily.

The IPC-6 will light the ON and "Outlet 1" LED's. You are now ready to program the "turn on" sequence for each switched outlet.

1.Select either or both of the trigger buttons (A, B). This will determine which device(s) will trigger outlet 1 to turn on.

2.Adjust the "on" time delay. The two buttons to the right of

"TECH TIP"

Devices must be turned off before programming any of the outlets.

IPC-6 specifications

Niles Audio has long been a respected name in the audio industry, known for producing high-quality speakers and audio distribution systems. One of its standout products is the IPC-6, an in-wall speaker design that combines innovative technology with elegant aesthetics, making it a popular choice for home theater enthusiasts and audiophiles alike.

The Niles IPC-6 is characterized by its sleek, unobtrusive design that allows it to blend seamlessly into any room decor. Its in-wall positioning not only saves space but also provides a clean and clutter-free look, making it an excellent choice for modern home interiors.

One of the standout features of the IPC-6 is its advanced driver technology. This model is equipped with a 6.5-inch polypropylene woofer, which delivers a deep, robust bass response that enhances the overall audio experience. The cone is designed to minimize distortion, ensuring that even the most dynamic soundtracks are reproduced accurately. Additionally, the IPC-6 houses a 1-inch silk dome tweeter, which provides crystal-clear high frequencies, ensuring that vocals and treble shine through in any audio mix.

The IPC-6 also employs Niles Audio's innovative Tri-axial Driver Design. This technology helps to create a wide soundstage, allowing for a more immersive listening experience. The speaker’s broad dispersion pattern means that sound is evenly distributed throughout the room, making them suitable for both large and small spaces.

Moreover, the IPC-6 features an adjustable tweeter that can be pivoted up to 30 degrees. This allows users to direct the sound to a specific listening area, offering personalized audio experiences whether for movies, music, or gaming.

Installation is simplified with the IPC-6, thanks to Niles’ unique mounting system. The speaker comes with integrated dog-ear brackets that secure the unit firmly to the wall, while the paintable grille allows it to match the wall color, further enhancing the aesthetic appeal.

In summary, the Niles Audio IPC-6 stands out with its impressive sound quality, advanced driver technology, and elegant design. Whether you are setting up a home theater or simply want to enjoy high-fidelity audio, the IPC-6 offers a sophisticated solution that caters to the needs of discerning listeners. It epitomizes the balance between performance and style, making it a top choice in the world of in-wall speakers.