Niles Audio IPC-6 specifications Features and Benefits

Page 3

I N T E L L I G E N T P O W E R C O N T R O L L E R

I N T E L L I G E N T P O W E R C O N T R O L L E R

TOOLS

REQUIRED

1/8" Standard Slotted Screwdriver

Wire Stripper

Features and Benefits

The IPC-6 offers unique technology never before available.

Advanced microprocessor design allows unparalleled flexi- bility and control.

The IPC-6 AccusenseTM circuitry automatically “locks on” to tiny differences in power consumption between a compo- nent’s “on” and “standby” states.

The IPC-6 PowertrackerTM circuitry will track those tiny dif- ferences even under varying line voltage conditions.

The IPC-6 AccusenseTM circuitry will work with all types of power supplies including switching types.

Advanced arc suppression techniques prevent power relay contact arcing, ensuring long relay life.

After a power failure, the IPC-6 will wait for you to again turn on the system. It does not blindly activate whatever was happening before the power failure.

The IPC-6 remembers which components you want turned on in two different situations. One situation is triggered by device “A”, the other situation is triggered by device “B”.

You can trigger either the “A” or the “B” sequences with a 12 volt DC signal applied to the 12 volt sensing inputs.

The IPC-6 can remember different delay times for each of its switched outlets and control relays.

Total delay time is adjustable from 0 to 99 seconds.

Separate "on" and "off" delay times and sequences can be programmed into the IPC-6.

The IPC-6's 12 volt DC outputs can operate many of the Niles automated switchers.

The IPC-6 has 2 sets of normally open and normally closed low voltage relay contacts controllable by either or both sequences.

Printed circuit board design assures high reliability.

Ideal for home theater, multiroom audio, home automa- tion, boardrooms, museum exhibits, and commercial installations of all types.

Limited two year parts and labor warranty.

Proudly made in the USA.

3

4

Image 3
Contents IPC-6 Introduction IPC-6Features and Benefits Installation Installation ConsiderationsProgram LED Contact Sensing Group Programming Measuring Power On and Standby StatesEnter the PS programming mode Programming Switched 120 volt Controlled low voltage OutletsErrors The display reads E1 Cancel ProgrammingTest Troubleshooting Sense a Sense BDevice you are controlling

IPC-6 specifications

Niles Audio has long been a respected name in the audio industry, known for producing high-quality speakers and audio distribution systems. One of its standout products is the IPC-6, an in-wall speaker design that combines innovative technology with elegant aesthetics, making it a popular choice for home theater enthusiasts and audiophiles alike.

The Niles IPC-6 is characterized by its sleek, unobtrusive design that allows it to blend seamlessly into any room decor. Its in-wall positioning not only saves space but also provides a clean and clutter-free look, making it an excellent choice for modern home interiors.

One of the standout features of the IPC-6 is its advanced driver technology. This model is equipped with a 6.5-inch polypropylene woofer, which delivers a deep, robust bass response that enhances the overall audio experience. The cone is designed to minimize distortion, ensuring that even the most dynamic soundtracks are reproduced accurately. Additionally, the IPC-6 houses a 1-inch silk dome tweeter, which provides crystal-clear high frequencies, ensuring that vocals and treble shine through in any audio mix.

The IPC-6 also employs Niles Audio's innovative Tri-axial Driver Design. This technology helps to create a wide soundstage, allowing for a more immersive listening experience. The speaker’s broad dispersion pattern means that sound is evenly distributed throughout the room, making them suitable for both large and small spaces.

Moreover, the IPC-6 features an adjustable tweeter that can be pivoted up to 30 degrees. This allows users to direct the sound to a specific listening area, offering personalized audio experiences whether for movies, music, or gaming.

Installation is simplified with the IPC-6, thanks to Niles’ unique mounting system. The speaker comes with integrated dog-ear brackets that secure the unit firmly to the wall, while the paintable grille allows it to match the wall color, further enhancing the aesthetic appeal.

In summary, the Niles Audio IPC-6 stands out with its impressive sound quality, advanced driver technology, and elegant design. Whether you are setting up a home theater or simply want to enjoy high-fidelity audio, the IPC-6 offers a sophisticated solution that caters to the needs of discerning listeners. It epitomizes the balance between performance and style, making it a top choice in the world of in-wall speakers.