System Programming
Event Menu
The bottom right portion contains the operand, which defines what device or group of devices on which the Event will be based. The list provides the following options:
OFF | Used for status on binary inputs (ex.: used with 301ADI) |
ON: | Used for status on binary inputs (ex.: used with 301ADI) |
Fault: | Bases trigger on maintenance alarm, communication failure or |
device failure
Alrm A: If the chosen device or group has an Alarm A or Alarm 1, an event will be triggered.
Alrm B: If the chosen device or group has an Alarm B or Alarm 2, an event will be triggered.
Alrm C: If the chosen device or group has an Alarm C, an event will be triggered.
The Coverage Period screen allows the period that will be covered by the Event to be defined. (The time frames for each of these periods can be defined in the controller Config menu.) This option provides two further selection fields:
Day definition field: allows All day, Daytime, or Nighttime to be selected
Week definition field: Weekend, Working Days, All week
3. Events | 001 |
All week
1.Use the keypad up or down arrows to scroll to either All day or All week
2.Press Enter to select. The value can now be changed
3.Use the keypad up ro down arrows to scroll through options (see above)
4.Press Enter to select.
46 | 96d User Manual | |
| Honeywell | 8/10 |