Copy Programming, Battery Installation

4.4.4 COPY PROGRAMMING

The COPY button allows you to easily copy temperature or fan programs from any day, to any other day, to all weekdays, to both weekend days, or all days. The Copy function copies only the temperature or fan program from a day, not both at the same time. To copy a day’s temperature or fan programs from one day to others:

●In the appropriate programming mode press COPY. The display will show COPY FROM with current day being programmed flashing below.

●Use the UP or DOWN arrow buttons to select the day you want to copy from. Selections are:

Any single day, SUN - SAT All weekdays MON to FRI

Both weekend days SAT and SUN All days at once SUN – SAT

●Press NEXT.

●Again use the UP or DOWN arrow buttons to select the day or days you want to copy.

●Press NEXT to accept the displayed copy to days, and the copy will be complete.

5. BATTERIES/MAINTENANCE

Depending on your installation, your unit may require batteries to control your HVAC system. If required, replace your thermostat’s batteries at least once a year or when the battery symbol appears in the display.

5.1. BATTERY INSTALLATION

1. Remove fresh batteries from their carton.

2. Remove body of thermostat as described during installation.

3. Remove the used batteries if present and replace them within 90 seconds to avoid having to reset the day and time.

4. Install two new “AA” size Energizer or Duracell alkaline batteries in the battery compartment. Observe the polari- ty marking shown in the compartment.

WARNING: Use Energizer® or DURACELL®

Alkaline Batteries Only.

5. Place the thermostat body back on the wall.

NOTE: Replace your thermostat’s batteries with new alkaline batteries at least once a year or when the battery symbol appears in the display.

The use of high quality alkaline batteries is absolutely required for your thermostat to operate properly.

6.TECHNICAL DETAILS

6.1.STAGING

● Stage one of a heating system will be activated at the value of swing 1 below the temperature set point. Stage one of a cooling system will be activated at the value of swing 1 above the temperature set point.

● Stage one of a heating system will be deactivated at the value of swing 1 above the temperature set point.

Stage one of a cooling system will be deactivated at the value of swing 1 below the temperature set point.

●Stage two of a heating system will be activated at the value of (swing 1 + swing 2) below the temperature set point. The auxiliary heat indicator AUX HT will be visible when a second stage of heat is activated. Stage two of cooling will be activated at the value of (swing 1 + swing 2) above the temperature set point.

●Stage two of a heating or cooling system will be deac- tivated at the temperature set point.

●Stage three of a heating system will be activated at the value of (swing 1 + 2*swing 2) below the temperature set point.

●Stage three of a heating or cooling system will be deactivated at the temperature set point.

7. TECHNICAL ASSISTANCE

If you have any problems installing or using this thermo- stat, please carefully and thoroughly review the instruc- tion manual. If you require assistance, please contact our Technical Assistance Department at 856-234-8803 during regular business hours between 8:00AM and 4:30PM Eastern Standard Time, Monday through Friday. You can also receive technical assistance online anytime day or night at http://www.luxproproducts.com. Our web site offers you answers to the most common technical ques- tions, and also permits you to email your questions to our technical support staff at your convenience.

8. WARRANTY

Limited Warranty: If this unit fails because of defects in materials or workmanship within three years of date of original purchase, LUX Products Corporation will, at its option, repair or replace it. This warranty does not cover damage by accident, misuse, or failure to follow installa- tion instructions. Implied warranties are limited in dura- tion to three years from date of original purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Please return malfunctioning or defective units to the participating retailer from which purchase was made, along with proof of purchase. Please refer to "TECHNICAL ASSISTANCE" before returning thermostat. Purchaser assumes all risks and liability for incidental and conse- quential damage resulting from installation and use of this unit. Some states do not allow the exclusion of inci- dental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Applicable in the U.S.A. only.

PSP722E specifications

The Lux Products PSP722E is a cutting-edge programmable thermostat designed to provide homeowners with greater control over their heating and cooling systems. With a sleek design and user-friendly interface, this device offers a perfect blend of functionality and style, making it an attractive addition to any home.

One of the standout features of the PSP722E is its 7-day programmable scheduling capability. This allows users to set different temperature settings for each day of the week, accommodating varying schedules and ensuring that the home is at the perfect temperature when occupants are present. This feature not only enhances comfort but also promotes energy efficiency, as users can set lower temperatures during times when the house is unoccupied.

The thermostat is equipped with an easy-to-read LCD display that provides clear visibility of the current temperature settings and schedule. The intuitive interface allows homeowners to navigate through the various options with ease, making adjustments simple, even for those who may not be tech-savvy. Furthermore, the backlit screen ensures visibility, even in low-light conditions.

Energy savings are further maximized by the built-in energy-saving features. The Smart Recovery technology allows the thermostat to learn the amount of time it takes to reach a desired temperature, adjusting the heating or cooling schedule accordingly. This means that the system will start operating earlier if necessary, ensuring that the home reaches the desired temperature by the scheduled time, without wasted energy.

The Lux Products PSP722E is compatible with a wide range of HVAC systems, including gas, oil, electric, and heat pump units. This versatility makes it a suitable option for various home configurations, allowing it to easily replace most existing thermostats without the need for additional wiring or modifications.

Moreover, the thermostat features a user-friendly interface that includes one-touch buttons, making it easy to adjust the temperature settings on the fly. Users can also toggle between Fahrenheit and Celsius, catering to personal preferences.

In summary, the Lux Products PSP722E programmable thermostat combines advanced scheduling capabilities, energy-efficient technologies, and an intuitive design to enhance comfort and efficiency in any home. Its versatile compatibility with different HVAC systems makes it an ideal choice for homeowners looking to upgrade their heating and cooling controls while promoting energy savings.