Installation

INSTALLATION INSTRUCTIONS FOR

ELV1/PSPLV510

Programmable Line Voltage Thermostat

LUX PRODUCTS CORPORATION • Mt. Laurel, New Jersey 08054, USA 43331-04

WARNING: Use Energizer® or DURACELL® Alkaline Batteries Only.

Energizer® is a registered trademark of Eveready Battery Company, Inc.

DURACELL® is a registered trademark of The Gillette Company, Inc.

W A R N I N G

•This Thermostat is a line voltage (120 / 240 Vac) control. Do not install it unless you are completely familiar with house wiring. If improperly handled, there can be a risk of electric shock hazard which may cause serious injury or death.

•The thermostat is rated for normal full load current on a dual residential 20A circuit breaker or fuse block. Do not use on circuits protected by higher-rated over-current protection devices. Some sustained fault conditions can cause product failure.

•Do NOT connect to voltage different from the device rating.

C A U T I O N

•Disconnect power supply before making wire connections to prevent electrical shock or equipment damage.

•All wiring must comply with applicable codes and ordinances.

•Thermostats are designed to be used with appliances having a limit control.

•Maximum load for this thermostat MUST NOT EXCEED 3800W, otherwise a potential fire hazard exists.

Location:

Install a vertical switch box for mounting the thermostat approximately 1.5 m (5 ft.) above the floor on an inside wall where the thermostat will be exposed to average room temperature. The thermostat must be placed away from concealed warm or cold water pipes, air ducts, or drafts from hallways, fireplaces or stairways to sense temperature properly. Do not place the thermostat above the heater.

WIRING

For Use On:

•Heating Only 120/240 Vac Single Pole Applications

•Baseboard, Ceiling Cable and other Radiant Heat

Not For Use On:

•Double Pole Applications

•Heating/Cooling or Cooling Only

•Low Voltage (24Vac) Systems

Electrical Rating

16A at 120/240 Vac

1900W at 120Vac (Non-Inductive) 3800W at 240 Vac (Non-Inductive)

Temperature Differential

• ±1°F Factory Preset; Adjustable

Batteries

•Two Energizer® or DURACELL® “AA” alkaline batteries

(not included)

Programming

•Preprogrammed - 4 Periods per day

•5 / 2 Programming

•Weekdays/Weekends can be different

•°F / °C Changeable

•Temporary Temperature Override

•Vacation Hold

Dimensions

•4.7” T x 2.7” W x 2.4” D

•1.4” D from wall surface

Wall Plate

•4.8” W x 5.0” H Wallplate Included

1.Disconnect power while installing. Double check that the thermostat is rated for the voltage and amperage load to be controlled.

2.Remove the cover by carefully pressing the button at the bottom of the thermostat and swinging the body up and away.

3.When replacing an old line voltage wall thermostat, remove it carefully to avoid damage to the insulation on the wiring. Check the old insulation for cracks, nicks, or fraying and apply certified electrical tape where necessary to achieve adequate insulation, or replace the wires in an approved fashion.

4.Attach the wires with solderless wire connectors (provided). Be sure that all wire connectors are tight.

ELV1/PSPLV510 specifications

The Lux Products ELV1/PSPLV510 is a cutting-edge programmable thermostat designed to enhance energy efficiency while providing optimum comfort for homeowners. This sleek device combines modern design with advanced technology to offer reliable heating and cooling control.

One of the standout features of the ELV1/PSPLV510 is its user-friendly interface. The device features a large, easy-to-read LCD screen that displays the current temperature and settings clearly. This intuitive interface allows users to navigate through settings easily, making temperature adjustments straightforward and hassle-free.

The thermostat allows for 7-day programming, giving users ample flexibility to create customized schedules for each day of the week. This scheduling capability means users can set different heating and cooling temperatures for weekdays and weekends, maximizing comfort while minimizing energy waste. The ELV1/PSPLV510 also supports multiple programming options, enabling users to select from pre-set energy-saving schedules or create their own unique programs based on their lifestyle.

One of the notable technologies incorporated into the ELV1/PSPLV510 is its adaptive intelligent recovery feature. This technology enables the thermostat to learn how long it takes for a home to reach the desired temperature and adjusts the heating or cooling start time accordingly. As a result, the thermostat ensures that the home reaches the desired comfort level by the programmed time, without wasting energy.

Another significant characteristic of the ELV1/PSPLV510 is its compatibility with multi-stage heating and cooling systems. This versatility means that it can control systems such as central heating and air conditioning, heat pumps, and gas furnaces, making it an ideal choice for a wide range of residential applications.

In addition to its efficiency features, the ELV1/PSPLV510 is designed with sustainability in mind. By reducing energy consumption, homeowners can reduce their carbon footprint, promote environmental responsibility, and lower their energy bills.

Overall, the Lux Products ELV1/PSPLV510 programmable thermostat stands out for its ease of use, advanced scheduling capabilities, and energy-saving technologies. It offers an effective solution for homeowners seeking to improve their climate control management while also contributing to a more sustainable future. With its reliable performance and modern features, the ELV1/PSPLV510 is a valuable addition to any home.