Runco D-73D Possible Audio Latency for Various Input Timings, Substrate such as glass or acrylic

Installation

Tip	For best performance, always use “first-surface” mirrors in your
	rear-projection installation (as opposed to conventional,
	“second-surface” mirrors with the reflective surface behind a transparent
	substrate such as glass or acrylic).
	First-surface mirrors provide a strict reflection without the “ghosting”
	effect seen with a second surface mirror, where a faint secondary
	reflection could be observed coming from the front surface of the glass.
	This is especially critical for 3D viewing; with a conventional
	second-surface mirror, the resulting image quality may be unacceptable.

Due to its extraordinarily high level of video processing performance, the DHD Controller	Audio/Video
may distribute video signals with a perceptible level of audio latency. In order to easily	Synchronization Issues
solve this issue, Runco recommends using the DHD Controller with a high-quality audio
receiver that has the ability to effectively synchronize audio and video signals.
Most mainstream audio receiver/switchers have the ability to synchronize the audio and
video to the Advanced Television Systems Committee (ATSC) prescribed tolerances.
According to the ATSC, the sound program should never lead the video program by more
than 15 milliseconds, and should never lag behind the video program by more than 45
milliseconds.
In addition, many video displays and A/V receivers introduce additional latency that needs
to be compensated for during the installation.
Table 3-5shows the amount of possible audio latency given different signal input timings.

Table 3-5. Possible Audio Latency for Various Input Timings

Input Timing	Possible Audio Latency (milliseconds)
480i	133
480p	83
576i	160
576p	100
720p/50	100
720p/60	83
1080i/25	160
1080i/30	133
1080p/24	125
1080p/50	80
1080p/60	67

D-73d Series Installation/Operation Manual 29