Runco D-73D On / OFF, Cursor Buttons, For more information about aspect ratios, refer to Table

System Overview

1.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2.LIGHT

Press to illuminate the buttons.

3.ON / OFF

Press to turn the DHD Controller and projector on or off.

4.ENTER

Press to select a highlighted menu item or confirm a changed setting.

5.Cursor Buttons (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menu is present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9 DOWN Button = 16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema - Native

For more information about aspect ratios, refer to Table 4-1.

Note

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = HDMI 4 - HDMI 3 - HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 - Component - Composite 3 - Composite 2 - Composite 1

RIGHT Button = Composite 1 - Composite 2 - Composite 3 - Component - HD 1 - HD 2 - SCART - HDMI 1 - HDMI 2 - HDMI 3 - HDMI 4

6.EXIT

Press this button to exit the current menu and return to the previous one.

7.MENU

Press this button to show or hide the OSD controls.

8.Memory Preset Buttons:

ISF NIGHT

Press to recall settings for the current input from the “ISF Night” memory preset.

ISF DAY

Press to recall settings for the current input from the “ISF Day” memory preset.

CUST 1

Press to recall settings for the current input from the “Custom 1” memory preset.

CUST 2

Press to recall settings for the current input from the “Custom 2” memory preset.

9.VID 1 (1) / VID 2 (2) / VID 3 (3)

Press to select a composite video input as the source or to enter the numeric character “1,” “2” or “3.”

18 D-73d Series Installation/Operation Manual