Operation

•Remote Network Control: Select Remote Network Control from the Network menu to enable or disable control of the DHD Controller via an IP connection (typically using a web browser). Set it to On to allow all incoming remote network connectivity. Set it to Off to disable any incoming network communication that was not initiated by the DHD Controller.

Note

This setting has no effect on the E-Mail Notification or Auto

Firmware Upgrade functions.

Color Space: Select Color Space from the Service menu to choose the color space of the source signal for HDMI, RGB, and component connections.

•The default setting, Auto, functions as follows:

•HDMI: If the Auxiliary Video Information (AVI) infoframe contains color space and/or range data, the DHD Controller uses that information. Otherwise, for RGB sources, the DHD Controller uses the RGB-Videocolor space. For component SDTV and EDTV resolutions, REC601 is used. For other component video resolutions, REC709 is used.

•RGB: If Hsync or Vsync signals are present, the DHD Controller uses the RGB-PCcolor space. Otherwise, REC601 is used for SDTV and EDTV sources, and REC709 for all other sources.

•Component: For SDTV and EDTV resolutions, the DHD Controller uses the REC601 color space. For all other resolutions, REC709 is used.

In most cases, the Auto setting determines the correct color space to use. If it does not, you can force the DHD Controller to use a specific color space. Choose one of the following:

•REC709 sets the color space matrix to that defined in ITU-R BT.709.

•REC601 sets the color space matrix to that defined in ITU-R BT.601.

•RGB-PCuses RGB color space and sets black at 0,0,0 RGB and white at 255,255,255 RGB, assuming an 8-bit image.

•RGB-Videouses RGB color space and sets black at 16,16,16 RGB and white at 235,235,235, assuming an 8-bit image, to correspond to the luminance values defined in digital component standards.

Triggers: Select Triggers from the Service menu to configure the 12-volt trigger outputs. You can assign one or more trigger outputs to each aspect ratio. Those triggers are then activated by selecting that aspect ratio.

Miscellaneous: Select Miscellaneous from the Service menu to set the following options:

•Language: Select Language from the Miscellaneous menu and press the up- or down-arrows to select the OSD Language (English, Français, Deutsch, Italiano,

Español, Svenska, (Simplified Chinese), (Traditional Chinese),

Português, (Russian), (Japanese) or (Korean).

•OSD Timer: Select OSD Timer from the Miscellaneous menu to set the OSD Timer, which controls how long the menus remain on-screen after selecting them. Select from 5 to 60 seconds, in one-second increments. Or, set the timer to 0 (disabled) if you want the menus to remain on-screen indefinitely.

D-73d Series Installation/Operation Manual

91

Page 106 Page 108
Page 107
Image 107
Runco D-73D operation manual Firmware Upgrade functions
Page 106 Page 108

D-73D specifications

The Runco D-73D is a visionary addition to the world of high-definition projection technology. Built with a passion for delivering unparalleled image quality and an immersive viewing experience, this projector is designed for both home theater enthusiasts and professional-grade installations. With its advanced features and innovative technologies, the D-73D stands out in its category.

One of the main characteristics of the Runco D-73D is its impressive resolution. It supports a full 1080p image, ensuring that every detail is rendered with clarity, making it an ideal choice for cinematic experiences at home or in specialized environments. The projector employs three 0.61-inch DLP (Digital Light Processing) chips, which not only enhance color accuracy but also contribute to a sharper overall image compared to traditional projection systems.

The D-73D incorporates Runco's unique Vivix® video processing technology, which is designed to optimize image quality. This technology improves color reproduction, contrast, and detail, ensuring that the contents displayed are not just sharp, but vibrant and lifelike. Coupled with 10-bit processing, the projector delivers over a billion colors, facilitating stunning gradations in both dark and bright scenes.

Another noteworthy feature of the D-73D is its customizable lens options. This flexibility allows users to adjust the projection distance and size based on the specific requirements of their space. Whether it's a large home theater or a dedicated screening room, the D-73D can accommodate various setups, making it versatile for different environments.

Importantly, the projector also supports Runco’s proprietary LightLevel® technology. This innovative feature enables the system to adapt to ambient lighting conditions, ensuring optimal performance regardless of the lighting scenario. Consequently, users can enjoy their favorite films and shows without the interruptions of washed-out colors or poor contrast.

Connectivity is another strong suit of the D-73D, offering multiple inputs, including HDMI, which allows for seamless integration with modern devices. This capability ensures that users can easily connect Blu-ray players, gaming consoles, and more.

In summary, the Runco D-73D is a cutting-edge projector that combines high-resolution performance, advanced video processing, customizable features, and versatile connectivity. Its commitment to delivering exceptional image quality makes it a premier choice for those who demand an extraordinary visual experience. Whether for dedicated home cinemas or commercial use, the D-73D is designed to impress at every viewing.
Top Page Image Contents