Operation

Network: The options in the Network menu allow you to configure the network communication features.

IP Configuration: Select IP Configuration from the Network menu to either set the IP address, subnet mask and default gateway of the DHD Controller manually or obtain these settings automatically, from a DHCP (Dynamic Host Configuration Protocol) server. (Most broadband routers and gateways support DHCP.) You can also test the network connection from this menu.

DHCP: To enable the DHCP client in the DHD Controller, select DHCP from the IP Configuration menu and set it to On. With this setting, the DHD Controller’s IP address, subnet mask and default gateway are assigned by the local DHCP server.

To manually configure these values, set DHCP to Off.

The IP Address, Subnet Mask and Default Gateway items in the IP Note Configuration menu are disabled (grayed out) when DHCP is

enabled.

IP Address: Select IP Address from the IP Configuration menu to manually configure the IP Address of the DHD Controller, as follows:

1.Press or to select the first, second, third or fourth byte of the address.

2.Press or to set the value of that byte. The range is from 0 to 255 inclusive.

3.Repeat Steps 1 and 2 for all four bytes of the address.

4.Press MENU when you have finished setting the address.

Subnet Mask: Select Subnet Mask from the IP Configuration menu to manually configure the IP subnet mask. The procedure is similar to that for setting the IP address.

Default Gateway: Select Default Gateway from the IP Configuration menu to manually configure the default IP gateway. The procedure is similar to that for setting the IP address.

Communication Test: Select Communication Test from the IP Configuration menu to verify proper operation of the network communication link.

To start the test, select Start Test from the Communication Test menu. The DHD Controller displays the message “Performing Communication Test.” When the test completes, the DHD Controller displays either “Failed” (along with the error that occurred) or “Succeeded.”

Auto Firmware Upgrade: Select Auto Firmware Upgrade from the Network menu to enable automatic detection of a newer version of the DHD Controller firmware. If one is found, you can configure the DHD Controller to install it automatically. These features make it easier to keep your DHD Controller firmware up-to-date.

Auto Check For New Firmware: To have the DHD Controller automatically check for firmware updates at periodic intervals, select Auto Check for New Firmware from the Auto Firmware Upgrade menu and set it to On. If you prefer to do this manually, set it to Off and use the Check For New Firmware sub-menu (described below).

Auto Perform Upgrade: If the “Auto Check For New Firmware” process determines that a newer firmware version than the one currently installed is available, you can have the DHD Controller automatically download and install it. To do this, select Auto Perform Upgrade from the Auto Firmware Upgrade menu and set it to On. The upgrade will occur the next time the DHD Controller is “power-cycled” (powered off, then on again).

88

D-73d Series Installation/Operation Manual

Page 104
Image 104
Runco D-73D operation manual Operation

D-73D specifications

The Runco D-73D is a visionary addition to the world of high-definition projection technology. Built with a passion for delivering unparalleled image quality and an immersive viewing experience, this projector is designed for both home theater enthusiasts and professional-grade installations. With its advanced features and innovative technologies, the D-73D stands out in its category.

One of the main characteristics of the Runco D-73D is its impressive resolution. It supports a full 1080p image, ensuring that every detail is rendered with clarity, making it an ideal choice for cinematic experiences at home or in specialized environments. The projector employs three 0.61-inch DLP (Digital Light Processing) chips, which not only enhance color accuracy but also contribute to a sharper overall image compared to traditional projection systems.

The D-73D incorporates Runco's unique Vivix® video processing technology, which is designed to optimize image quality. This technology improves color reproduction, contrast, and detail, ensuring that the contents displayed are not just sharp, but vibrant and lifelike. Coupled with 10-bit processing, the projector delivers over a billion colors, facilitating stunning gradations in both dark and bright scenes.

Another noteworthy feature of the D-73D is its customizable lens options. This flexibility allows users to adjust the projection distance and size based on the specific requirements of their space. Whether it's a large home theater or a dedicated screening room, the D-73D can accommodate various setups, making it versatile for different environments.

Importantly, the projector also supports Runco’s proprietary LightLevel® technology. This innovative feature enables the system to adapt to ambient lighting conditions, ensuring optimal performance regardless of the lighting scenario. Consequently, users can enjoy their favorite films and shows without the interruptions of washed-out colors or poor contrast.

Connectivity is another strong suit of the D-73D, offering multiple inputs, including HDMI, which allows for seamless integration with modern devices. This capability ensures that users can easily connect Blu-ray players, gaming consoles, and more.

In summary, the Runco D-73D is a cutting-edge projector that combines high-resolution performance, advanced video processing, customizable features, and versatile connectivity. Its commitment to delivering exceptional image quality makes it a premier choice for those who demand an extraordinary visual experience. Whether for dedicated home cinemas or commercial use, the D-73D is designed to impress at every viewing.