3Com 9000 manual Maximum NNI Hops parameter is updated to

NNI Hops Setup 165

Update Maximum Enter the new Maximum NNI Hops parameter to update the Maximum NNI Hops NNI Hops parameter of the CoreBuilder 9000 ATM Enterprise Switch. The

choice of parameter value depends on the size and topology of the network. For a hierarchically designed network, it is normally chosen to be 7. For more information, see “Hop Limit — Avoiding loops” on page 111 in the Operations Guide.

Command Actions

Enter the menu sequence:	(1) SYS: Platform configuration
	(1) SET: Switch setup
	(3) NNI: NNI setup
	(2) SMD: NNI Set maximum number
	hops
Enter a parameter at the prompt
Parameter	Format or Range
Number of hops	0-120
Direct access sequence:	1 1 3 2 [parameters]
Command Result
System action taken:	The maximum number of hops permissible for NNI
	routing is displayed.
System message display:	NNI max hops was set.

Example

Enter: 1 1 3 2 9

The following message appears:

NNI max hops was set.

The Maximum NNI Hops parameter is updated to 9.