Create Permanent Virtual Channel (PVC) 155

Command Result

System action taken: A full PVC with the required parameters is created.

System message display: A new PVC was created with call number:

<n>

Example

Enter: 3 4 1 2 p2p 0 0 0 5.1.2 1 55 1 5.1.4 0 60

The following message is displayed:

A new PVC was created with call number: 11

Port Static Connection Parameters

Table 23 shows the port static connection parameters that must be entered at the prompt.

Table 23 Full PVC Call Parameters

Name

Description

 

 

Call Type

Whether the call defined is point-to-point (P2P) or

 

point-to-multipoint (P2M)

 

No default

Cell Loss level

Threshold for cell based discard

Priority

Whether the call cells are transferred through the

 

CoreBuilder® 9000 ATM Enterprise Switch to the high

 

priority queue or low priority queue

 

Default: Low priority

First CLP

The setting of the cell loss priority at the input port

First Port number

The input port slot.group.port

First VPI

The input port VPI value for the call

First VCI

The input port VCI value for the call

Second Port number

The output port slot.group.port

Second CLP

The setting of the cell loss priority at the output port

Second VPI

The output port VPI value for the call

Second VCI

The output port VCI value for the call

 

 

Page 155
Image 155
3Com 9000 manual Command Result, Full PVC Call Parameters