Configuring Interface Modules 97
Set Port Clock Mode Set the port clock command mode of a selected port as Normal or Loop
Timing and save to flash memory. You are prompted to specify a port and
a mode.
Command Actions
Command Result
Example
Enter: 1 5 4 1.1.2 1
The following message is displayed:
Setting port clock mode command has completed successfully.
The clock operational mode of port 1.1.2 is set to loop timing.
Enter the menu sequence: (1) SYS: Platform Configuration
(5) IFC: Interface Cards
(4) PCK: Set Port Clock Mode
Enter a parameter at the prompt
Parameter Format or Range
Port Number slot.group.port (0.0 - For all)
Port Clock Mode 0for Normal
1 for Loop timing
Direct access sequence: 1 5 4 [parameters]
System action taken: The clock operational mode of the selected port on the
interface module is set and saved.
System message display: Setting port clock mode command has
completed successfully.