3Com 9000 manual Enter 2 3 1 2 1

LEC Not in ELAN Security List 315

Update LEC ELAN Join Updates the default ELAN join privilege for LECs which are not in the Privilege for Current ELAN security list for the current session. The default join privilege can be

Session Accept or Reject.

You need to save to flash to maintain this parameter after the next reboot.

Command Actions

Enter menu sequence:	(2) LEM: LAN Emulation
	(3) SEC: LE Security Configuration
	(1) EDB: Elan default behavior
	(2) SDF: Set elan default behavior
Enter a parameter at the prompt
Parameter	Format or Range

ELAN ID

Join Privilege

Direct access sequence:

Command Result

System action taken:

System message display:

1–16

See “Display ELAN Parameters in LES Database” on page 283.

1–Accept

2–Reject

2 3 1 2 [parameters]

The ELAN join privilege for LECs which are not in the ELAN security list is changed for the current session.

Default behavior changed successfully. Any LEC currently in operational state will remain so unless it is restarted.

Example

Enter: 2 3 1 2 1 1

The following message is displayed:

Default behavior changed successfully.

Any LEC currently in operational state will remain so unless it is restarted.

The default ELAN join privilege for LECs which are not in the ELAN security list is changed to Accept for the ELAN with ID 1.