3Com 9000 manual Enter 1 1 9 4 3 4 14

370CHAPTER 11: CONFIGURING AND MANAGING PNNI

Set SVCC Retry Time Sets the SVCC (Switch Virtual Channel Connection) retry time. The SVCC retry time is the time that the specified node will delay after a viable SVCC-based RCC is unexpectedly taken down, before attempting to reestablish it. A change to the SVCC retry time takes place after the next reboot.

Command Actions

Enter menu sequence:	(1) SYS: Platform Configuration
	(1) SET: Switch setup
	(9) PNI: PNNI Setup
	(4) CFP: Configure PNNI
	(3) NCF: Node Configuration
	(4) TIM: Timers
	(14) SRT: SVCC Retry Time
Enter a parameter at the prompt
Parameter	Format or Range
initiation time	1 - 60000 seconds

Direct access sequence:

Command Result

System action taken:

System message display:

1 1 9 4 3 4 14 [parameters]

The SVCC retry time is displayed and is updated to its new value.

Default value is <x>. New value is <y>

Example

Enter: 1 1 9 4 3 4 14 20

The following message is displayed:

Default Value is 30, new value is 20

Press ENTER to continue...