Setting the Timers 369
Set SVCC Initiation
Time Sets the SVCC initiation time. The SVCC initiation time is the ti me it t akes
to reinitiate a Switched Virtual Channel Connection after it has been
taken down. For more information on virtual channel connections, see
“Virtual Channels” on page 84 in the Operation s Guide. A change to the
SVCC initiation time takes place after the next reboot.
Command Actions
Command Result
Example
Enter: 1 1 9 4 3 4 13 20
The following message is displayed:
Default Value is 4, new value is 20
Press ENTER to continue...
Enter menu sequence: (1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(13) SIT: SVCC Initiation Time
Enter a parameter at the prompt
Parameter Format or Range
initiation time 1 - 60000 seconds
Direct access sequence: 1 1 9 4 3 4 13 [parameters]
System action taken: The SVCC initiation time is displayed and is updated
to its new value.
System message display: Default value is <x>. New value is <y>