3Com 9000 manual Enter 4 2 3 1.1.1 3

196CHAPTER 8: VIEWING STATISTICS

Display Counters Per Display total cells through a connection specified by its VPI/VCI, presented VPI/VCI according to the setting of the CLP bit. If the call is P2M (Point to

Multipoint), the transmit or receive information is not always applicable.

Command Actions

Enter the menu sequence: (4) STS: Statistics

(2) ATM: ATM layer

(3) GVP: Get counters per vpi/vci

Enter a parameter at the prompt

Parameter Format or Range

Port ID

VPI

VCI

Direct access sequence:

Command Result

System action taken:

System message display:

<slot.group.port>

Perform menu item (3)CON\(2)RTG\(1)CLL to get the VPI/VCI values for a call. See “Display Call Routed to ATM Address” on page 140 for details.

4 2 3 [parameters]

The total number of cells through a connection is displayed according to the setting of the CLP bit.

Information is displayed as shown in the example.

Example

Enter: 4 2 3 1.1.1 3 200

The following message is displayed:

ATM Statistics per	VPI/VCI:
---------------------------
Ingress cells with	clp0 set:	2
Ingress cells with	clp1 set:	1
Egress cells with clp0 set:		2
Egress cells with clp1 set:		3