Setting Interface Parameters 391

Reset PNNI Interface Resets all the PNNI interface parameters for the specified interface port Parameters to Default (as selected in the Select Port option) to their default values. The

Values parameter reset takes place immediately. See “Select Port for Interface Parameter Setting” on page 383 for details.

Command Actions

Enter menu sequence:

(1) SYS: Platform Configuration

 

(1) SET: Switch setup

 

(9) PNI: PNNI Setup

 

(4) CFP: Configure PNNI

 

(4) ICF: Interface Configuration

 

(2) IPR: Interface Parameters

 

(8) SDF: Set to Defaults

Enter a parameter at the prompt

Parameter

Format or Range

Confirm reset

y or n

Direct access sequence:

1 1 9 4 4 2 8

Command Result

System action taken:

System message display:

The interface parameters for the specified port are set to their default values.

Interface parameters were set to their

defaults.

Example

Enter: 1 1 9 4 4 2 7 y

The following message is displayed:

Interface parameters were set to their defaults

Press ENTER to continue...

Page 391
Image 391
3Com 9000 manual 9 4 4 2