3Com 9000 manual 9 4 4 2 5 parameters

Setting Interface Parameters 389

Set ABR Sets the ABR Administrative Weight parameter. The ABR administrative Administrative weight is the administrative weight of this interface port for the available

Weight bit rate service category.

Command Actions

Enter menu sequence:	(1) SYS: Platform Configuration
	(1) SET: Switch setup
	(9) PNI: PNNI Setup
	(4) CFP: Configure PNNI
	(4) ICF: Interface Configuration
	(2) IPR: Interface Parameters
	(5) ABW: ABR Admin Weight
Enter a parameter at the prompt
Parameter	Format or Range
ABR admin weight	1 - 2147483647
Direct access sequence:	1 1 9 4 4 2 5 [parameters]

Command Result

System action taken:

System message display:

.The ABR admin weight parameter is updated to its new value.

Default Value is 5040, New value is

set to <n>.

Example

Enter: 1 1 9 4 4 2 5 19000

The following message is displayed:

Default value is 5040, new value is set to 19000

Press ENTER to continue...