3Com 9000 manual PVC PVCs Setup, GEP Display PVCs

Create Permanent Virtual Channel (PVC) 161

Display PVCs Display the PVCs for a specific port and call number.

Command Actions

Enter the menu sequence:			(3) CON: Connections
			(4) S&C: Setup of Connections and ATM
			Addresses
			(1) PVC: PVCs Setup
			(7) GEP: Display PVCs
Enter a parameter at the prompt
Parameter			Format or Range
Port number			<slot.group.port>
Call number			Call number or 0 for all calls
Direct access sequence:			3 4 1 7 [parameters]
Command Result
System action taken:			The PVC information is displayed.
System message display:			Information is displayed as shown in the example.
Example
Enter: 3 4 1	7	5.1.1 0

The following information is displayed. See Table 23 for more information about the parameters shown.

Call Call	Call	Num	Pri Cll In conn			In	In	Out	Out	Out
number type	state	out			VPI/VCI	conn	conn	conn	conn	conn
		cons				port	mbr	VPI/VCI port		mbr
----- ------- -------- ----- -- --- ------- ------ ------ ------- ------ ------
2 PVC,P2P Active			1 H	N	5/200	5.1.1		6/ 300	5.2.1