JVC DLA-M5000LU Setting Up or Changing the Display Size, Press PAGE BACK twice, Main menu, Lens

• The menu disappears.

1 Press the MENU/ENTER button.

• The main menu appears on the screen.

2 Press MENU/ENTER toward the 5or ∞ mark to select a submenu item, “DISPLAY SIZE”.

• The selected item (text display) is shown in magenta color.

3 Press the MENU/ENTER button to set.

• A submenu item, “DISPLAY SIZE adjustment menu” appears on the screen.

D I S P L A Y S I Z E

( U S E R 1 )

Operating the Main Menu (Cont.)

Setting Up (or Changing) the Display Size

■Remote control unit

QUICK
ALIGN.	OPERATE
	AV HIDE
PRESET	PAGE BACK	PAGE BACK button
LENS LOCK
	N
	M
	E
	N
	U
	/
UNLOCK	E
	T
	E
	R
		MENU/ENTER button

AV RGB/COMPUTER

U T +

SHIFT ZOOM FOCUS

D W –

LENS

If the display size (horizontal effective dots and vertical effective lines of PC video boards, etc.) of an input signal (source) registered in the user source setup does not match the display size projected by this projector, this setup should be performed.

In the user source setup, a display size most approximate to the standard setting of the projector is automatically assumed. If this setting is different from the display size of the signal actually being input, display size setup becomes necessary.

Notes

•Display size setup cannot be performed for signals of NTSC (480i), 480p, PAL, HDTV (1035i/1080i) or 720p.

•Do not perform display size setup if the display size of the equipment that is feeding input signal is not known.

•This function is not meant for enlarging or reducing the screen size.

■Main menu

	A U T O
R G B 1	S X G A 1

P I X E L C L O C K

P O S I T I O N

P I C T U R E

O P T I O N S

S O U R C E

C H A N N E L

U S E R S O U R C E S E T U P

D I S P L A Y S I Z E

D E C O D E R	A U T O (	)
L A N G U A G E	E N G L I S H

Submenu item [DISPLAY SIZE]

H P I X E L	1 1 5 2
V P I X E L	8 7 0

H C E N T E R	6 0
	2 4
V C E N T E R

(DISPLAY SIZE adjustment menu)

4 Press MENU/ENTER toward the 5or ∞ mark to select “H. PIXEL”, then press MENU/ENTER toward the 2 or 3 mark to set the number of horizontal pixels.

• The selected item (text display) is shown in magenta color.

Note

•The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode.

5 Press MENU/ENTER toward the 5or ∞ mark to select “V. PIXEL”, then press MENU/ENTER toward the 2 or 3 mark to set the number of vertical pixels.

6 Press PAGE BACK twice.

(To be continued on the next page)

57