![Control Panel (Cont.)](/images/new-backgrounds/122953/12295317x1.webp)
Controls and Features (cont.)
Control Panel (Cont.)
1 2 | 3 | 4 5 6 | 7 | 8 | 9 | p |
TEMP
STAND BY OPERATE LAMP EMERGENCY AV RGB SETTING QUICK
ALIGN.
7AV button
Use this button to select a device such as a video deck connected to the EXT. IN terminal of the projector. Each time you press the button, the device selected changes as follows:
Y/C* VIDEO*
YPBPR
*Y/C and VIDEO can be used only when a video board separately sold has been installed.
8RGB button
Use this button to select a device connected to the RGB
RGB 1 RGB 2
pQUICK ALIGN. button
While a menu screen is shown, use this button to adjust the values for the item selected. When no menu is shown, the quick alignment function works.
• When a menu is shown
button: The value for the selected item increases. button: The value for the selected item decreases.
• When no menu is shown
Press the button and button at the same time:
Memo
The quick alignment function :
•Works for computer input (RGB- 1 and - 2 input terminals) signals.
•Does not work for video input (EXT. IN input terminal) signals.
9SETTING button
Use this button to call up the setting menu. For details, refer to “Making Basic Settings” on page 30.
CAUTION
•Automatic adjustment with the quick alignment function should be done on a bright
9