JVC DLA-M5000SCU manual Connecting to Devices which Control the Projector, To remote control

Connecting to Various Devices (Cont.)

Connecting to Devices which Control the Projector

Before connection, be sure to turn off both the projector and devices to be connected.

•Read the manual thoroughly which comes with each device to be connected.

•By connecting a computer to the RS-232C terminal, you can control the projector.

*For details, consult an authorized your dealer or service center.

•If you connect the cable terminal of the remote control and the REMOTE terminal of the projector with a remote control cable, you can use the remote control in a place or at an angle from which the infrared beam cannot reach the projector.

•Desktop type

Y/CV

RGB RGB IN-1

R RGB IN-2 EXT. IN

To RS-232C connector

GH/CS

BV

RS-232C reverse connection cable (separately available)

• Note type

REMOTE

RGB OUT CON

RS-232C

To RS-232C connector

To REMOTE terminal

To RS-232C connector

• Remote control (when remote control cable is used)

To remote control

cable terminal

Remote control cable

22