JVC DLA-M5000LU Connecting the Power Cord Supplied, To use the projector, Remove the lens cap

Connecting to Various Devices (Cont.)

Connecting the Power Cord (Supplied)

After all devices have finished being connected, connect the projector’s power cord. At this time, do not turn on the MAIN POWER switch yet.

1 Insert the supplied power cord into the power input terminal (AC IN ~) of the projector.

1. Remove the power input terminal cover.

The cover is a screwed type. Turn the cover in the direction of the arrow to remove.

1

Power cord (supplied)

2

220V, single phase

CAUTIONS

To prevent fire and electric shock, observe the following:

•When you do not use devices, pull out their power cords from wall outlets.

•Do not connect the devices with power cords other than supplied.

•Do not use voltage other than the power voltage indicated.

•Do not scar, damage, or work on the power cords. Also, do not put a heavy object on, heat or pull the power cords, otherwise they may be damaged.

•Do not insert or pull out the plugs with a wet hand.

2.Insert the projector plug of the supplied power cord into the power input terminal of the projector. Align the groove on the projector plug of the power cord with the claw on the power input terminal of the projector, and push the plug in firmly.

After that, turn the ring on the plug in the direction of the arrow to fix.

■To use the projector

• Remove the lens cap.

CAUTION

•Be sure to remove the cap; otherwise, it may be deformed (or degraded in quality) or melted, possibly causing a fire or malfunction.

Lens cap

2Insert the plug of the supplied power cord into a wall outlet, and turn the plug to right to fix.

CAUTIONS

•Since the power requirement of the projector is high, be sure to insert the power plug directly into a wall outlet.

•This projector requires a single phase, 3-wire, 220V — 240V wall outlet.

23