Controls and Features (Cont.)
Remote Control Unit
r e w q
p
9
8
QUICK
ALIGN.OPERATE
| AV HIDE |
PRESET | PAGE BACK |
| LENS LOCK | N |
| M |
| E |
| N |
| U/ |
UNLOCK | E |
T | |
| E |
| R |
AV RGB/COMPUTER
U T +
SHIFT ZOOM FOCUS
D W –
LENS1
2
3
4
5
6
7 |
1Remote control’s signal transmitter
2OPERATE button
To turn on or off the power, press this button for one or more seconds.
*About 30 seconds after the power has turned on, video image will appear on the screen.
3PAGE BACK button
While no menu is displayed, pressing this button causes a direct channel to be displayed.
Memo
Direct channel display:
A direct channel display allows you to switch between chan- nels which have lines and sources registered. For details, refer to “Switching channels using a direct channel” (page 52).
4MENU/ENTER button
Use this button to display the main menu, or while the main menu is displayed, use the button to select an item to adjust or make adjustment. While the main menu is displayed, pressing MENU/ENTER displays a details setting (submenu) if the selected item has a details setting.
For how to operate the buttons, see page 13.
5RGB / COMPUTER button
6FOCUS (+/–) button
Use these buttons to adjust the focus of the projected picture.
+: The focus point becomes more distant.
7REMOTE terminal
Use a remote control cable to connect between the projector and the remote control. For details, refer to “Connecting to Devices which Control the Projector” on page 22.
8ZOOM (T/W) button
Use these buttons to increase or decrease the screen size.
(They can only be used when a zoom lens is used.)
T:The screen size decreases.
W:The screen size increases.
9SHIFT (U/D) button
Use these buttons to adjust the height of the projection screen when projectors are used in a stack configuration.
U:Moves the screen upwards.
D:Moves the screen downwards.
Use this button to select the devices connected to the projector’s RGB IN (RGB input)
11
