Installing the Projector
Precautions for Installation
CAUTIONS
•Since the projector weighs approx. 70 kg (154 lbs.), be sure to use four or more people when lifting or moving it; otherwise, the projector could possibly drop, causing personal injury and/or damage to the projector.
•Do not install the projector in the following places :
•There is much water, humidity or dust.
•The projector may be subjected to oil smoke or cigarette smoke.
•On a soft surface such as a carpet or cushion.
•The projector may be subjected to direct sunlight.
•Temperature is high or humidity is low.
Allowable operation temperature range: + 5°C to + 40°C (41°F to 104°F)
Allowable relative humidity range: | 90% or less (no condensation) |
Allowable storage temperature range: |
■When installing the projector, observe the followings:
• Do not use the projector placed on its side or upside down.
The projector can not be used by being placed on its side or upside down ;Otherwise, it could malfunction.
• Use the projector within the installed angle.
Avoid using the projector inclined ±5° or more
• Do not block the exhaust vents.
Do not use a cover which encloses the projector
Allowable minimum space required
| 305 mm (12”) |
600 mm | 600 mm |
| 305 mm (12”) |
| RGB |
|
|
R | RGB | EXT. IN | Y |
G | H/C |
| |
B | V |
| |
|
|
| CONTROL |
|
|
|
600 mm
14