3Com 9000 manual Parameters, Enter 1 Following message is displayed

78CHAPTER 5: CONFIGURING THE PLATFORM

Reset All Except IP Reset configuration parameters for the CoreBuilder 9000 ATM Enterprise Addresses Switch to their factory default settings with the exception of the IP

parameters.

Some parameters are reset only after the next reboot. These parameters include ATM addresses, PVC, and NMS parameters.

Command Actions

Enter the menu sequence: (1) SYS: Platform Configuration

(2) FLS: Flash setup

(2) RES: Reset All Except IP Addresses to Defaults

Direct access sequence: 1 2 2

Command Result

System action taken: All configuration parameters except IP are reset to their factory default values.

System message display: Reset of all saved configuration except

IP was done.

Example

Enter: 1 2

The following message is displayed:

Reset of all saved configuration except IP was done.

All configuration parameters are reset to their factory values.