ATM Addresses Port Table 135
Get ATM Addresses at
Port Get the manual ATM addresses at a specific port.
Command Actions
Command Result
Example
Enter: 3 4 2 4 0.0
The following information is displayed:
UME Parameters
Table19 describes the parameters displayed by the command.
Enter the menu sequence: (3) CON: Connections
(4) S&C: Setup of Connections and ATM
addresses
(2) STP: Static ATM Addresses Setup
(4) STC: Get ATM Addresses at Port
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port> (0.0 for all ports)
Direct access sequence: 3 4 2 4
System action taken: The manual ATM addresses at the specified port or all
ports are displayed.
System message display: Information is displayed as shown in the example.
Port ATM address: Network prefix ATM address:user_part member man
number number
-------- -------------------------------------- -------------------- ------ ---
< 2.1.1> 47. 0. 0. 0. 0. 0.3c. 0. 0.b*. *. *. * *. *. *. *. *. *. * 21101 YES
< 4.1.2> 39.89.0*. *. *. *. *. *. *. *. *. *. * *. *. *. *. *. *. * 41201 YES
Table19 Parameters
Name Description
Port Number ATM port number <slot.group.port>.
ATM address -
Network prefix Network prefix of ATM address.