18 ABOUT THIS GUIDE
Command
Description In Chapters 5 through 11 of this guide, all of the Local Management
Application (LMA) commands are explained. For each command, a
standard format describes the command. Following is a sample of
command descriptions:
Command Actions
Command Result
Enter the menu sequence: (1) SYS: Platform configuration
(1) SET: Switch setup
(1) PAS: Password setup
(1) REA: Set Read-access password
Enter a parameter at the prompt
Parameter Format or Range
New password Up to eight alphanumeric characters
New password again Enter the password exactly as you did before
Direct access sequence: 1 1 1 1 [parameters]
System action taken: The read-access password is updated.
System message display: The password has been changed.
A
B
C
D