3Com 9000 manual Default Values Command Actions, All the timers are set to the default values

Setting the Timers 373

Set All Timers to Their Resets all the timers in the timers menu to their default values.

Default Values

Command Actions

Enter menu sequence:	(1) SYS: Platform Configuration
	(1) SET: Switch setup
	(9) PNI: PNNI Setup
	(4) CFP: Configure PNNI
	(3) NCF: Node Configuration
	(4) TIM: Timers
	(18) STD: Set All Timers to their
	Default Values
Enter a parameter at the prompt
Parameter	Format or Range
Confirm reset	y or n
Direct access sequence:	1 1 9 4 3 4 18
Command Result
System action taken:	All the timers are reset to their default values.
System message display:	All timers were set to their defaults.

Example

Enter: 1 1 9 4 3 4 18 y

The following message is displayed:

PNNI Node 1 of 1.

All Timers were set to their defaults

Press ENTER to continue...

All the timers are set to the default values.