3Com 9000 manual Select Port for Interface Parameter Setting

Setting Optimization Metrics 383

Select Port for Interface Parameter Setting

Selects the port for which the interface parameters will be set.

Command Actions

Enter menu sequence:	(1) SYS: Platform Configuration
	(1) SET: Switch setup
	(9) PNI: PNNI Setup
	(4) CFP: Configure PNNI
	(4) ICF: Interface Configuration
	(1) SPT: Select Port

Enter a parameter at the prompt

Parameter	Format or Range
port number	slot.subslot.port
Direct access sequence:	1 1 9 4 4 1 [parameters]

Command Result

System action taken:

System message display:

The specified port is set to the active port, ready for configuration

Current port number is

<slot.subslot.port>

Example

Enter: 1 1 9 4 4 1 4.2.1

The following message is displayed:

Current port number is 4.2.1