Setting Up for Management 63

Update IP Subnet Update the IP subnet mask of the CoreBuilder 9000 ATM Enterprise Mask Switch. The default factory IP subnet mask address is 255.255.255.0.

Command Actions

Enter the menu sequence:

(1) SYS: Platform Configuration

 

(1) SET: Switch Setup

 

(2) MNG: Management Setup

 

(4) MSK: Subnet Mask Setup

 

(2) SSM: Set Subnet Mask

Enter a parameter at the prompt

Parameter

Format or Range

Subnet mask address

Valid subnet mask

Direct access sequence:

1 1 2 4 2 [parameters]

Command Result

 

System action taken:

The subnet mask address is updated.

System message display:

Subnet Mask address was successfully

 

set for the next reboot.

Example

Enter: 1 1 2 4 2 255.255.0.0

The following message is displayed:

Subnet Mask address was successfully set for the next reboot.

The IP subnet mask is updated to 255.255.0.0, and takes effect after the next reboot.

Page 63
Image 63
3Com 9000 manual MSK Subnet Mask Setup, SSM Set Subnet Mask, Subnet Mask address was successfully, Set for the next reboot