LAN Emulation Redundancy 271
Make Primary LES
Active Reestablish the primary LES of the ELAN as the active LES. When the
secondary LES of an ELAN is active instead of the primary LES, this
command causes LECs to be released from the secondary LES to join the
primary LES. Specify the ELAN name of the primary LES.
A secondary LES becomes the active LES on the failure of the primary LES
and it remains active even when the primary LES recovers.
To perform this command, the ELAN must be in secondary state and it
must be redundant.
You need to perform this command on all CoreBuilder 9000 ATM
Enterprise Switches with active LECS and verify the result.
Command Actions
Command Result
Enter menu sequence: (2) LEM: LAN Emulation
(1) LCS: LE Configuration Service
(5) LNT: LECS Network topology
(9) RDN: LE Service redundancy
(3) FEP: Force Elan to Primary
Enter a parameter at the prompt
Parameter Format or Range
ELAN name Up to 32 characters. For more information, see “Add
ELAN” on page 259.
Direct access sequence: 2 1 5 9 3 [parameter]
System action taken: The primary LES of the specified ELAN becomes the
active LES.
System message display: Force to Primary message sent to LECS