Setting the Timers 363
Set Retransmit
Interval Sets the retransmit interval. The retransmit interval is the time after which
unacknowledged PTSEs will be retransmitted. A change to the retransmit
interval takes place after the next reboot.
Command Actions
Command Result
Example
Enter: 1 1 9 4 3 4 7 1
The following message is displayed:
Default Value is 5, new value is 1
Press ENTER to continue...
Enter menu sequence: (1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(7) RTI: Retransmit Interval
Enter a parameter at the prompt
Parameter Format or Range
interval 1 - 60000 seconds
Direct access sequence: 1 1 9 4 3 4 7 [parameters]
System action taken: The retransmit interval is displayed and is updated to
its new value.
System message display: Default value is <x>, new value is <y>