3Com 9000 manual Port Static Connection Parameters

Display Port Connections 149

Example

Enter: 3 3 2 3.1.2 a 0

The following information is displayed:

Conn	Call	Port	Member	Conn	Conn	Oper	Admin	Originator CLP
number	number number		number type		VPI/VCI	status	status
-----	----- --------		------ ------- ------- -------- -------- ----------							---
1	1 <1.1.1>			PVC,P2P	3/200 Active		Active	Calling	N

Port Static Connection Parameters

Table 22 shows the port static connection parameters displayed by the command.

Table 22 Port Static Connection Parameters

Name	Description
Connection number	Number identifying the connection.
Call number	Number identifying the call.
Port number	Number identifying the port.
Member number	Sequential numbering of ATM addresses registered at a
	port. Used to specify SVC.
Connection Type	Whether the connection is using SVC or PVC, and if it is a
	point-to-point (P2P) or point-to-multipoint (P2M) call.
Connection VPI	The Virtual Path Identifier (VPI) value defined for the
	connection.
Connection VCI	The Virtual Channel Identifier (VCI) value defined for the
	connection.
Operational Status	The operational status of the connection, active or not.
Administration Status	The administration status of the connection, active or not.
Originator	Whether the connection originates at the calling UNI or
	the called UNI.
CLP	The action which is to be performed on the CLP bit. The
	possible values are: clear bit (0), set bit (1), or no
	change(N).