3Com 9000 manual Redundant ELANs Specific Parameters, Describes the ELANs specific parameters

276CHAPTER 9: MANAGING LAN EMULATION

Redundant ELANs Specific Parameters

Table 36 describes the ELANs specific parameters.

Table 36 Redundant ELANs Specific Parameters

Parameter	Description
ELAN name	The ELAN name.
ELAN status	The status of the ELAN. This can be:
	Operational	The ELAN is operating normally.
	New	A newly created ELAN that has not
		yet been processed by the LECS.
	Init	A newly created ELAN that is in the
		process of becoming operational.
	Old	The ELAN is in the process of
		becoming inoperable.
ELAN State	The state of the ELAN. This can be Primary, Secondary, In
	Check (when the ELAN is in transient state) or No LES.
State start time (Sec)	The absolute time the CoreBuilder® 9000 ATM Enterprise
	Switch was started (in seconds).
Number config	The number of configuration requests for this ELAN that
requests O.K.	were okayed.
Number config	The number of configuration requests for this ELAN that
requests failed	were failed. A request can fail if the ELAN State is ‘NO LES’,
	meaning no LES is connected.
Primary LES Id	The Id of the primary LES.
Secondary LES Id	The Id of the secondary LES.