3Com 9000 manual ETH Ethernet Type Setup, SET Set Ethernet Type, Eth Type was successfully set for

Setting Up for Management 69

Update Ethernet Update the Ethernet encapsulation type of the CoreBuilder 9000 ATM Encapsulation Type Enterprise Switch. The options are:

￿1-ETH: Standard encapsulation — according to 802.3

0-LLC: Enhanced encapsulation

The default Ethernet encapsulation type is 1-ETH.

For more information, see “Ethernet Encapsulation Type” on page 172 in the Operations Guide.

The Ethernet encapsulation type is updated after the next reboot.

Command Actions

Enter the menu sequence:			(1) SYS: Platform Configuration
			(1) SET: Switch Setup
			(2) MNG: Management Setup
			(7) ETH: Ethernet Type Setup
			(2) SET: Set Ethernet Type
Enter a parameter at the prompt
Parameter			Format or Range
Ethernet encapsulation			1 for type ETH
type			0 for type LLC
Direct access sequence:			1 1 2 7 2 [parameters]
Command Result
System action taken:			The Ethernet encapsulation type is updated.
System message display:			Eth Type was successfully set for the
			next reboot.
Example
Enter: 1 1 2	7	2 1

The following message is displayed:

Eth Type was successfully set for the next reboot.

The Ethernet encapsulation type is updated to ETH and takes effect after the next reboot.