3Com 9000 manual Example Display Info for a Connection at a Port, Port SVC Connection Parameters

Display Port Connections 147

Example — Display Info for a Connection at a Port

Enter: 3 3 1 1.1.1 3 200

The information for the connection 0/46 at port 1.1.1 is displayed.

Connection number:	1
Call number:	1
Port:
Connection type:	PVC,P2P
Connection VPI:	3
Connection VCI:	200
Operational status:	Active
Administration status:	Active
Time of last change of operational state:	655350 msec
Originator:	Calling
CLP:	N

Port SVC Connection Parameters

Table 21 shows the port SVC connection parameters displayed by the command.

Table 21 Port SVC Connection Parameters

Name	Description
Connection number	Number identifying the connection (VPI/VCI).
Call number	Number identifying the call.
Port number	Number identifying the port.
Member number	Sequential numbering of ATM addresses registered at a
	port. Used to specify SVC.
Connection Type	The connection type specifies whether the connection is
	using SVC or PVC, and if it is a point-to-point (P2P) or
	point-to-multipoint (P2M) call.
Connection VPI	The Virtual Path Identifier (VPI) value defined for the
	specific port.
Connection VCI	The Virtual Channel Identifier (VCI) value defined for the
	specific port.
Operational Status	Specifies the operational status of the connection, active or
	not.
Administration Status	Specifies the administration status of the connection (active
	or not).