3Com 9000 manual Value of the UBR optimization parameter is updated to

Setting Optimization Metrics 381

Set Optimization for Updates the Unspecified Bit Rate (UBR) optimization parameter. A change UBR to the UBR optimization parameter takes place immediately.

Command Actions

Enter menu sequence:	(1) SYS: Platform Configuration
	(1) SET: Switch setup
	(9) PNI: PNNI Setup
	(4) CFP: Configure PNNI
	(3) NCF: Node Configuration
	(5) OPT: Optimization Metrics
	(2) SOP: Set Optimization
	Metrics
	(5) OUR: Optimization for UBR
Enter a parameter at the prompt
Parameter	Format or Range
constant bit rate	0 - 6
Direct access sequence:	1 1 9 4 3 5 2 5 [parameters]

Command Result

System action taken:

System message display:

The UBR optimization parameter is displayed and is updated to its new value.

Default value is <x>. New value is

<y>.

Example

Enter: 1 1 9 4 3 5 2 5 5

The following message is displayed:

Default Value is ‘0 - opt_admin_weight’, New value is ‘5 -

opt_clr_clp0’

Press ENTER to continue...

The value of the UBR optimization parameter is updated to 5.