Signaling Setup 179

Reset Signaling Reset the signaling configuration parameters for the CoreBuilder 9000 Configuration ATM Enterprise Switch to their factory default settings. All signaling

timers are set to default as UNI and the UNI version is set to 3.0. The reset takes effect immediately.

Command Actions

Enter the menu sequence:

(1) SYS: Platform configuration

 

(1) SET: Switch setup

 

(4) SIG: Signaling Setup

 

(7) SIG: Set signaling configuration

 

to factory defaults

Enter a parameter at the prompt

Parameter

Format or Range

Confirm Reset

Y or N

Direct access sequence:

1 1 4 7

Command Result

 

System action taken:

The signaling configuration parameters are reset to

 

their factory default values.

System message display:

Signaling Configuration was set to

 

defaults.

Example

Enter: 1 1 4 7

The following prompt appears:

Do you really want to reset config? (Y/N) Y

Enter Y to confirm, N to cancel.

Signaling Configuration was set to defaults.

The signaling configuration parameters are set to their factory values.

Page 179
Image 179
3Com 9000 manual Enter 1 1 4 Following prompt appears, Enter Y to confirm, N to cancel