3Com 9000 manual Shows the Sscop Timers displayed by the command, QSA Get Signaling Qsaal

Signaling Timers 185

Display QSAAL Display the current QSAAL signaling protocol timer values and Service Signaling Timers and Specific Connection-Oriented Protocol (SSCOP) configuration parameters

Protocol for the specified port. The timer values are displayed in tenths of a Configuration second.

You can update the timer values by changing the timer resolution. For more information, see “Update Protocol Timer Resolution” on page 182. The configuration parameters can be altered.

Command Actions

Enter the menu sequence:	(1) SYS: Platform Configuration
	(1) SET: Switch Setup
	(4) SIG: Signaling Setup
	(4) QSA: Get Signaling QSAAL
	Configuration setup
Enter a parameter at the prompt
Parameter	Format or Range
Port number	<slot.group.port>
Direct access sequence:	1 1 4 4 [parameters]
Command Result
System action taken:	The current QSAAL signaling protocol timer values and
	SSCOP configuration parameters for the specified port
	are displayed.
System message display:	Information is displayed as shown in the example.

SSCOP Timers

Table 25 shows the SSCOP Timers displayed by the command.

Table 25 SSCOP Timers

SSCOP Timer	Description
Poll	The maximum time between transmission of a POLL PDU, when
	SD or SDP PDUs are queued for transmission or are outstanding
	pending acknowledgment.
Keep-Alive	Maximum time between transmission of POLL PDUs, when no
	SD or SDP PDUs are queued for transmission or are outstanding
	pending acknowledgment.