3Com 9000 manual Enter 3 4 2 1

132CHAPTER 6: MANAGING NETWORK INTERFACES

Delete All ATM Delete the ATM addresses registered at the specified port including those Addresses at Port registered by ILMI and those that were created manually through the

LMA. The addresses are deleted from the MIB at the port (they are de-registered).

When you delete addresses from a specific port, any existing connections associated with them are not deleted.

Command Actions

Enter the menu sequence:	(3) CON: Connections
	(4) S&C: Setup of Connections and ATM
	addresses
	(2) STP: Static ATM Addresses Setup
	(1) DAD: Delete all ATM Addresses of
	Port
Enter a parameter at the prompt
Parameter	Format or Range
Port ID	<slot.group.port> or 0.0 for all ports
Direct access sequence:	3 4 2 1 [parameters]
Command Result
System action taken:	The ATM addresses at port are deleted.
System message display:	All ATM addresses for port <x.x.x> were
	deleted.

Example

Enter: 3 4 2 1 3.1.2

The following message is displayed:

All ATM addresses for port 3.1.2 were deleted.