3Com 9000 manual 3 3 3

Configuring PNNI Nodes 347

Set Peer Group ID Sets the Peer Group ID of the PNNI node. For more information on peer groups, see “Organizing a Network Hierarchy” on page 183 in the Operations Guide.

Currently the peer group ID cannot be changed via this option. To change the peer group ID, the ATM address network prefix and node level should be changed. See “Set ATM Address” on page 344 and “Set Node Level” on page 341 in this chapter for details on how to change these.

Command Actions

Enter menu sequence:	(1)	SYS: Platform Configuration
	(1) SET: Switch setup
	(9) PNI: PNNI Setup
	(4) CFP: Configure PNNI
		(3) NCF: Node Configuration
		(3) CHR: Characteristics
		(3) PID: Peer Group ID
		(2) SPI: Set Peer Group ID
Direct access sequence:	1 1	9 4 3 3 3 2

Command Result

System action taken:

System message display:

None.

Peer Group ID can only be changed via the Node Level and ATM address network prefix.

Example

Enter: 1 1 9 4 3 3 3 2

The following message is displayed:

Peer Group ID can only be changed via the Node Level and ATM address network prefix.